Electrical Installation

SELECTING THE VOLTAGE FOR YOUR SPA

The Cumberland® and Aventine™ spas are designed to operate at either 115 or 230 volts, 60 Hz, while the Olympia spa model requires a dedicated 230 volt power supply. When the spa is connected to 115 volts, the heater will provide approximately 1000 watts of heat only when the pump is operating in LOW speed and the thermostat is calling for heat. When the spa is connected to 230 volts, the heater will provide approximately 4000 watts of heat when the pump is operating in LOW or HIGH speed and the thermostat is calling for heat.

All electrical connections must be made in accordance with the wiring information contained in the electrical control box or on the back of the field wiring access panel of the equipment module.

115 VOLT INSTALLATION

Spas provided with a factory- installed power supply cord are to be plugged into a grounded, grounding type, 115 volt, 20 ampere receptacle (Cumberland and Aventine model). No other electrical appliance or fixture can be used on this circuit.

IMPORTANT: Under NO circumstances should an extension cord be used. Use of an extension cord will seriously degrade the performance of the equipment module and can create an electrical hazard.

230 VOLT INSTALLATION

When using 230 volt power supply, installation of a 50 amp dedicated circuit is required. Your spa must be hardwired direct to a GFCI-protected subpanel by a licensed electrician. A wiring diagram is provided inside the equipment module showing where the connections are to be made.

ELECTRICAL REQUIREMENTS AND PRECAUTIONS

Your Caldera® spa has been carefully designed to give you maximum safety against electrical shock. Connecting the spa to an improperly wired circuit will negate many of the spa’s safety features. Improper wiring may also cause electrocution, risk of fire, and other risks of injuries. Please read and follow the electrical installation requirements and instructions for your spa completely!

115-230 VOLT CONVERSION (CUMBERLAND® AND AVENTINE™ MODELS)

Refer to the following instructions to convert your 115 volt Highland series spa to a 230 volt spa.

NOTE: Converting the spa to 230 volts operation should only be done by an authorized service agent or a qualified electrician.

The conversion requires a subpanel (230 volt) which may be purchased from your Authorized dealer. Ask for part # 38661

1.Disconnect the power cord from the house receptacle.

2.Remove the screws and open the equipment compartment door.

3.Remove the screws from the control box.

4.Open the control box cover.

5.Remove the power cord wires, and the power jumper wire (from line 2 and neutral) on the line side of the terminal block.

6.Locate Program Jumper JMP 1, using a pair of needle nose pliers, carefully move the jumper from pins 2 and 3 and move to pins 1 and 2 (see Figure below).

A licensed electrician must install the subpanel (available from your dealer) to supply power to the spa. The subpanel must be placed in sight of the spa at a minimum distance of 5 feet away.

Highland Series specifications

The Caldera Highland Series is an exceptional line of outdoor gear designed specifically for adventurers who seek the perfect blend of performance, comfort, and durability. Crafted with a deep understanding of the challenges faced in various environments, this series stands out for its innovative technologies and user-centric features.

One of the hallmark characteristics of the Caldera Highland Series is its use of advanced waterproof yet breathable materials. The outer fabric is engineered with a cutting-edge membrane that effectively repels water, keeping the user dry in unexpected downpours. Furthermore, this membrane allows moisture from within to escape, ensuring that wearers remain comfortable during intense physical activity. This feature is invaluable for those trekking through diverse climates, providing both protection and breathability.

In addition to weather resistance, the Highland Series includes an innovative insulation technology. Utilizing lightweight yet efficient insulation means that users can stay warm without the bulk associated with traditional outerwear. This is particularly important for those who prioritize both warmth and mobility during outdoor excursions. Designed for layering, the Highland Series garments fit seamlessly with other layers, enhancing versatility for various conditions.

Another notable aspect of the Caldera Highland Series is its attention to detail in design. The garments boast articulated joints and ergonomic cuts, allowing for an unrestricted range of motion. This design philosophy is particularly beneficial for climbers, hikers, and skiers who need gear that moves with them rather than against them.

Additionally, the series embraces sustainability, incorporating recycled and eco-friendly materials into its production processes. By prioritizing responsible manufacturing practices, Caldera not only focuses on performance but also on environmental stewardship, appealing to the growing number of eco-conscious consumers.

Finally, the Highland Series is equipped with strategic pocket placements and functional features such as adjustable hoods and cuffs, ensuring practicality without sacrificing style. With a focus on performance-driven functionality, durable craftsmanship, and a commitment to sustainability, the Caldera Highland Series offers outdoor enthusiasts a premier choice for their adventures, no matter where the journey leads. Whether hiking rugged trails or navigating snowy slopes, this series equips you with the reliability and comfort needed to conquer the great outdoors.