Linn EXOTIK PRE-AMPLIFIER Using the setup menus, Speaker setup, Size, Small Frequency EXOTIK+DA

Using the setup menus

To access the setup menus:

Either

●Press SETUP on the handset.

or

●Hold SELECT on the front panel until MAIN MENU / SPEAKER SETUP is shown on the display.

To access the installer menu:

●Hold SETUP on the handset or SELECT on the front panel until INSTALLER MENU is shown on the display (approximately 5 seconds).

To navigate through the menus and options:

●Use the / keys on the handset or front panel. Arrows on the display indicate which key(s) can be used.

To make a selection:

●Press ‘enter’ on the handset, or SELECT on the front panel.

To exit from the setup menus:

●Press SETUP on the handset (if changes have been made you will be prompted to save or not save the changes).

Setup English

Speaker setup

SIZE

Accesses the SPEAKER SIZE sub-menu.

For all loudspeakers in your system (except a subwoofer) you must inform the EXOTIK whether the speakers are LARGE or SMALL. These settings refer to the frequency response of the loudspeakers, not to their physical size.

Standard EXOTIK

For loudspeakers that operate below 100 Hz, select LARGE.

For loudspeakers that do not operate below 100 Hz, select SMALL. Frequencies in the audio signal that are below 100 Hz will be routed to a subwoofer, if present, or any LARGE loudspeakers, if not.

SMALL FREQUENCY (EXOTIK+DA)

Select the operating frequency that your limited bass response (SMALL) loudspeakers operate above. Frequencies in the audio signal that are below the selected option will be routed to a subwoofer, if present, or any full-range loudspeakers (LARGE), if not.

Options: 40 Hz, 60 Hz, 80 Hz, 100 Hz, 120 Hz

Default setting: 80 Hz

FRONT*

Large front speakers (full-range frequency response), set to LARGE. Small front speakers (limited bass response), set to SMALL.

Default setting: LARGE

*For two-channel systems, use the FRONT item and set CENTRE, SURROUND and SURROUND BACK to NONE.

EXOTIK PRE-AMPLIFIER

7 Owner’s Manual