Exmark OCDWB01 manual Operation, Opening the Discharge Gate

Page 13

Operation

Operation

Use the discharge gate to temporarily stop or deflect grass clippings away from sidewalks, parking lots, patios, or anywhere grass clippings are not desired to be discharged. The handle allows the discharge gate to be held in any position from fully closed to fully open.

Important: Make sure the mower is in neutral before operating the handle of the discharge gate.

Important: Always mow with the discharge deflector installed and in the down position.

DANGER

An uncovered discharge opening will allow objects to be thrown in an operator’s or bystanders’s direction. Also contact with the blade could occur. Thrown objects or blade contact can cause serious injury or death.

Never operate the mower with the discharge deflector raised, removed, or altered unless there is a grass collection system or mulch kit in place and working properly.

DANGER

The rotating blades under the mower deck are dangerous. Blade contact can cause serious injury or kill you.

Do Not put hands or feet under the mower or mower deck when the blades are engaged.

Opening the Discharge Gate

For all Walk-Behind Units except Vantage: Rotate

the handle upward to open the gate.

 

Figure 16

1. Rotate upward

2. Handle in gate open

 

position

For Vantage Units: Rotate the handle rearward to open the gate.

 

Figure 17

1. Rotate rearward

2. Handle in gate open

 

position

 

 

13

Image 13
Contents OCDWB01 All Rights Reserved Introduction Contents Safety Alert Symbol SafetyWear hearing protection when operating this machine Safe Operating PracticesMaintenance and Storage Safety and Instructional Decals Installing OCDWB01 on Mower Deck SetupAssembling Discharge Deflector to OCDWB01 For all Walk-Behind Units except Vantage For Vantage Units Drill Mounting bracket 16-18 x 5/8 inch Product Overview Opening the Discharge Gate OperationFor all Walk-Behind Units except Vantage Rotate Removing the OCDWB01 Closing the Discharge GateFor all Walk-Behind Units except Vantage Push Machine can now be used for side discharge mowing Handle Adjustment MaintenanceCheck for Loose Hardware Check Discharge Gate ClosureDischarge Gate Adjustment Problem Possible Cause Corrective Action TroubleshootingExmark Commercial Attachments and Accessories See EXMARK’S Complete Line of Accessories and Options
Related manuals
Manual 8 pages 32.44 Kb