Exmark OCDWB01 manual Maintenance and Storage

Page 6

Safety

collection system or mulch kit in place and working properly.

Stop engine, wait for all moving parts to stop, remove key and engage parking brake:

Before checking, cleaning or working on the mower.

After striking a foreign object or abnormal vibration occurs (inspect the mower for damage and make repairs before restarting and operating the mower).

Before clearing blockages.

Whenever you leave the mower.

WARNING

Hands, feet, hair, clothing, or accessories can become entangled in rotating parts. Contact with the rotating parts can cause traumatic amputation or severe lacerations.

Do Not operate the machine without guards, shields, and safety devices in place and working properly.

Keep hands, feet, hair, jewelry, or clothing away from rotating parts.

NEVER carry passengers. DO NOT operate the mower when people, especially children, or pets are in the area.

Maintenance and Storage

Disengage PTO, set parking brake, stop engine and remove key or disconnect spark plug wire. Wait for all movement to stop before adjusting, cleaning or repairing.

Use care when checking blades. Wrap the blade(s) or wear gloves, and use caution when servicing them. Only replace damaged blades. Never straighten or weld them.

Keep all guards, shields and all safety devices in place and in safe working condition.

Check all bolts frequently to maintain proper tightness.

Frequently check for worn or deteriorating components that could create a hazard.

WARNING

Removing standard original equipment parts, or using non-Exmark replacement parts and accessories may alter the warranty, traction, and safety of the machine. Failure to use original Exmark parts could cause serious injury or death.

Replace all parts with original Exmark parts.

6

Image 6
Contents OCDWB01 All Rights Reserved Introduction Contents Wear hearing protection when operating this machine SafetySafety Alert Symbol Safe Operating PracticesMaintenance and Storage Safety and Instructional Decals Setup Installing OCDWB01 on Mower DeckAssembling Discharge Deflector to OCDWB01 For all Walk-Behind Units except Vantage For Vantage Units Drill Mounting bracket 16-18 x 5/8 inch Product Overview Operation Opening the Discharge GateFor all Walk-Behind Units except Vantage Rotate Closing the Discharge Gate Removing the OCDWB01For all Walk-Behind Units except Vantage Push Machine can now be used for side discharge mowing Check for Loose Hardware MaintenanceHandle Adjustment Check Discharge Gate ClosureDischarge Gate Adjustment Troubleshooting Problem Possible Cause Corrective ActionExmark Commercial Attachments and Accessories See EXMARK’S Complete Line of Accessories and Options
Related manuals
Manual 8 pages 32.44 Kb