Exmark Turf Tracer HP manual Specifications

Page 16

2. SPECIFICATIONS

2.1 MODEL NUMBER:

Serial Nos. 440,000 & Higher: TT3615KAC; TT4817KAC; TT5217KAC; TT4817KAEC; TT5217KAEC

2.2ENGINE

2.2.1Engine Specifications: See your Engine Owner's Manual.

2.2.23600 RPM (No Load).

2.3FUEL SYSTEM

2.3.1Capacity: 5.0 gal.(18.9 L.)

2.3.2Type of Fuel: Regular unleaded gasoline, 87 octane or higher. In countries using the research method, it should be a 90 octane minimum.

2.3.3Fuel Filter: Replaceable in-line

2.3.4Fuel Shut-Off Valve: 1/4 turn

2.4ELECTRICAL SYSTEM

2.4.1Charging System: Flywheel Alternator

2.4.2Charging Capacity: 15 amps

2.4.3Battery Type: BCI Group U1

2.4.4Battery Voltage: 12 Volt; Polarity, negative ground

2.4.5Fuses: Two 20 amp blade type

2.5SAFETY INTERLOCK SYSTEM

Operator must have speed control lever in neutral, PTO disengaged, (and OPC levers depressed for electric start) to start engine. Release of OPC levers will cause the engine to stop if speed control lever is not in neutral and/or PTO is engaged.

2.6 STEERING CONTROL:

Fingertip drive control levers provide independent speed control, braking, and neutral to each drive wheel for moving forward or reverse, stopping, and power turning.

2.7 TRANSMISSION:

Twin Hydrostatic Drive

2.7.1Two Hydro Gear BDP-10A series variable displacement high efficiency pumps independently coupled to two high efficiency Parker/Ross wheel drive motors.

2.7.2Hydraulic Filter is replaceable cartridge type.

P/N 1-513211: 10 microns, 18 psi bypass (Summer use above 32° F (0°C))

P/N 1-523541: 40 microns, 18 psi bypass (Winter use below 32° F (0°C))

2.7.3

Speed Range:

Forward

0 - 6.2 mph (10.0 km/h)

 

 

Reverse

0 - 2.2 mph (3.5 km/h)

2.8 WHEEL DRIVE SYSTEM:

Drive wheels are direct coupled to Parker/Ross wheel drive motors with 1.0" (25.4 mm) tapered shaft.

2.9 TIRES

 

36” Drive

48” & 52” Drive

Front Caster

 

Pneumatic (Air-Filled)

Pneumatic (Air-Filled)

Semi-Pneumatic

Size

16 x 6.50-8

16 x 7.50-8

9 x 3.50-4

Quantity

2

2

2

Tread

Turf Master

Turf Master

Smooth

Ply Rating

4

4

 

Pressure

14 psi (97 kPa)

14 psi (97 kPa)

 

- 11 -

Image 16
Contents For Serial Nos 440,000 & Higher Potential Hazard Exmark Parts Plus Program Operators Manual Table of Contents Safety SpecificationsAssembly Instructions Maintenance & AdjustmentsSafety Your Safety is InvolvedSafety Alert Symbol TrainingCarbon monoxide can kill you Operation Potential Hazard Page Maintenance and Storage Safety Signs Riding AttachmentsPage Page Page Specifications Dimensions Assembly InstructionsTorque Requirements Machine is shipped with a filled lead acid battery Upper Handle Mounting Throttle Cable HOOK-UP PTO Engagement LinkageECS Handles Drive Lever Linkage Installation Service Hydraulic OILOperation Instructions Drive LEVER, Neutral Lock Latch OperationOff-Run Switch 15 & 17 HP Kawasaki Manual Start only Pre-Start Operating InstructionsPotential Hazard Rotating blades under the mower deck are dangerous Transporting Maintenance & Adjustments Periodic MaintenancePotential Hazard Blade Bolt Installation Service Interval After First 250 hrs, then yearly thereafter Page Charge Pump Location Grease Lubrication Chart Spray Lubricant ChartPage Adjustments Page Neutral Safety Switch Adjustment Blade Engagement LinkageHydro Drive Linkage Adjustment Hydro Control LINK/SWIVEL Adjustment Drive Lever and Latch in Neutral PositionWaste Disposal Hydro Pump Spring Tension SettingMotor OIL Disposal Trouble Shooting Battery DisposalMower Tracks to Left or Right Mower Cuts UnevenlyEngine Troubleshooting Table Engine TroubleshootingProblem Wiring Diagrams Hydraulic Diagram Limited Warranty Exmark Turf Equipment Fold Along Appropriate Line See EXMARK’S Complete Line of Products for Turf Care ALL Rights Reserved