Exmark Metro HP manual Potential Hazard

Page 9

WARNING

POTENTIAL HAZARD

Operating engine parts, especially the muffler, become extremely hot.

WHAT CAN HAPPEN

Severe burns can occur on contact.

Debris, such as leaves, grass, brush, etc. can catch fire.

HOW TO AVOID THE HAZARD

Allow engine parts, especially the muffler, to cool before touching.

Remove accumulated debris from muffler and engine area.

Install and maintain in working order a spark arrester before using equipment on forest-covered, grass-covered, or brush-covered unimproved land.

WARNING

POTENTIAL HAZARD

Hands, feet, hair, clothing, or accessories can become entangled in rotating parts.

WHAT CAN HAPPEN

Contact with rotating parts can cause traumatic amputation or severe lacerations.

HOW TO AVOID THE HAZARD

Do not operate the machine without guards, shields, and safety devices in place and working.

Keep hands, feet, hair, jewelry, or clothing away from rotating parts.

1.4.1Give complete, undivided attention to the job at hand.

1.4.2Mow only in daylight or good artificial light, keeping away from holes and hidden hazards. Do Not operate the mower when children or others are in the area!

1.4.3When feasible, avoid operating the equipment in wet grass.

1.4.4Use EXTREME caution when mowing and/or turning on slopes as loss of traction and/or tip-over could occur. The operator is responsible for safe operation on slopes.

DANGER

POTENTIAL HAZARD

Mowing on wet grass or steep slopes can cause sliding and loss of control.

WHAT CAN HAPPEN

Loss of control and/or loss of operator’s footing could result in a fall with an arm or leg getting under the mower or engine deck, which may result in serious injury or death.

HOW TO AVOID THE HAZARD

Mow across slopes, never up and down.

Do not mow slopes when grass is wet.

Do not mow near drop-offs or near water.

Do not mow slopes greater than 20 degrees.

Reduce speed and use extreme caution on slopes.

Avoid sudden turns or rapid speed changes.

-4 -

Image 9
Contents For Serial Nos 540,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Specifications Table of Contents SafetyAssembly Instructions Maintenance & Adjustments Safety Alert Symbol Safety Your Safety is Involved TrainingCarbon monoxide can kill you Operation Potential Hazard Page Maintenance and Storage Safety SignsRiding Attachments Page Page Specifications Assembly Instructions DimensionsTorque Requirements Upper Handle Mounting Speed Control Throttle Cable HOOK-UPPTO Engagement Linkage This Clearance should be Equal Shifter Lever To Transmission Drive Lever Linkage Installation Drive Lever Setting Controls Operation InstructionsNeutral LOCK/PARK Brake Latch PRE-STARTOperating Instructions Drive LEVER, Neutral LOCK/PARK Brake Latch Operation Transporting Periodic Maintenance Maintenance & AdjustmentsBlade Bolt Installation Must stop Page Spray Lubricant Chart Grease Lubrication ChartPage Cutting Height Adjustment AdjustmentsPTO Engagement Linkage Page Waste Disposal Trouble ShootingEngine Troubleshooting Engine Troubleshooting TableProblem Wiring Diagram 15 HP Kawasaki Year Limited Warranty Page Service Record Fold Along Appropriate Line See EXMARK’S Complete Line of Accessories