Exmark Mhp3615kac, Mhp4815kac manual Operation

Page 8

DANGER

POTENTIAL HAZARD

In certain conditions gasoline is extremely flammable and highly explosive.

WHAT CAN HAPPEN

A static charge can ignite gasoline vapors. A fire or explosion from gasoline can burn you, others, and cause property damage.

HOW TO AVOID THE HAZARD

Purchase and store gasoline only in an approved container.

Always place gasoline containers on the ground away from your vehicle before filling.

Do not fill gasoline containers inside a vehicle or on a truck or trailer bed because interior carpets or plastic truck bed liners may insulate the container and slow the loss of any static charge.

When practical, remove gas-powered equipment from the truck or trailer and refuel the equipment with its wheels on the ground.

If this is not possible, then refuel such equipment on a truck or trailer from a portable container, rather than from a gasoline dispenser nozzle.

If a gasoline dispenser nozzle must be used, keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete.

WARNING

POTENTIAL HAZARD

Gasoline vapor can collect inside enclosed trailers and may be ignited by electrical sparks or hot engine/exhaust components.

WHAT CAN HAPPEN

Explosion and fire may occur, resulting in property damage, personal injury, and/or death.

HOW TO AVOID THE HAZARD

Provide adequate ventilation of any enclosed trailer to prevent build up of gasoline vapors, especially at floor level.

Refuel only outdoors, never inside an enclosed trailer.

Be sure all fuel tanks and gasoline storage containers have proper caps installed to prevent spillage and minimize vapor escaping into the trailer.

Do not place any equipment that is leaking gasoline in an enclosed trailer.

1.4OPERATION

Although hazard control and accident prevention are partially dependent upon the design and configuration of the equipment, these factors are also dependent upon the awareness, concern, prudence, and proper training of the personnel involved in the operation, transport, maintenance, and storage of the equipment. It is essential that all Operator Safety Mechanisms be connected and in operating condition prior to use for mowing.

-3 -

Image 8
Contents For Serial Nos 510,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Safety SpecificationsAssembly Instructions Maintenance & AdjustmentsSafety Safety Alert SymbolYour Safety is Involved TrainingCarbon monoxide can kill you Operation Potential Hazard Page Riding Attachments Maintenance and StorageSafety Signs Location Front of Mower Page Specifications Torque Requirements Assembly InstructionsDimensions PTO Engagement Linkage Upper Handle MountingSpeed Control Throttle Cable HOOK-UP This Clearance should be Equal Shifter Lever To Transmission Drive Lever Linkage Installation Drive Lever Setting Operation Instructions ControlsPRE-START Neutral LOCK/PARK Brake LatchOperating Instructions Drive LEVER, Neutral LOCK/PARK Brake Latch Operation Transporting Maintenance & Adjustments Periodic MaintenancePotential Hazard Blade Bolt Installation Must stopPage Grease Lubrication Chart Spray Lubricant ChartPage Adjustments Cutting Height AdjustmentPTO Engagement Linkage Page Trouble Shooting Waste DisposalProblem Engine TroubleshootingEngine Troubleshooting Table Wiring Diagram 15 HP Kawasaki Year Limited Warranty Page Service Record Fold Along Appropriate Line See EXMARK’S Complete Line of Accessories