2.SPECIFICATIONS
2.1MODEL NUMBER: MHP3615KAC; MHP4815KAC
2.2ENGINE
2.2.1Engine Specifications: See your Engine Owner's Manual.
2.2.23600 RPM (No Load).
2.3FUEL SYSTEM
2.3.1Capacity: 5.0 gal. (18.9 L.)
2.3.2Type of Fuel: Regular unleaded gasoline, 87 octane or higher. In countries using the research method, it should be a 90 octane minimum.
2.3.3Fuel Filter: Replaceable
2.3.4Fuel
2.4SAFETY INTERLOCK SYSTEM
Operator must have transmission in neutral and PTO disengaged to start engine. Release of OPC levers will cause the engine to stop if transmission is not in neutral and/or PTO is engaged.
2.5 STEERING/BRAKE CONTROL:
Fingertip drive control levers provide independent speed control, braking, and neutral to each drive wheel for moving, stopping, and power turning. Parking brakes are engaged by locking drive control levers in the “brake” position.
2.6 TRANSMISSION:
2.6.1Peerless
2.6.2 Speed Range: 1st | 2.0 mph (3.22 km/h) | 4th | 4.1 mph (6.60 km/h) |
2nd | 2.7 mph (4.35 km/h) | 5th | 6.2 mph (9.98 km/h) |
3rd | 3.5 mph (5.63 km/h) | Rev. 3.1 mph (4.99 km/h) | |
2.7 WHEEL DRIVE SYSTEM:
Banded double
2.8 TIRES: | Drive | |
|
| Pneumatic |
| Size | 16 x |
| Quantity | 2 |
| Tread | Turf Master |
| Ply Rating | 4 |
| Pressure | 14 psi (97 kPa) |
Front Caster
9 x
2
Smooth
2.9 DECK
2.9.1 | Cutting Width: | Model 36 in | 35.25 in. (89.5 cm) |
|
|
| Model 48 in | 47.25 in. (120.0 cm) |
|
2.9.2 | Discharge: Right Side |
|
| |
2.9.3 | Blade Size: | Model 36 in | 18.00 in. (45.7 cm).... | Qty. 2 |
|
| Model 48 in | 16.25 in. (41.3 cm).... | Qty. 3 |
2.9.4Type of Drive: Manual engagement of belt with
2.9.5Deck Mounting: Full floating deck is attached to
2.9.6Cutting Height: Adjusts in 1/2” (1.3 cm) increments from 1.5” (3.8 cm) to 4 1/2” (11.4 cm).
-9 -