Exmark M216KASPC manual Using the Grass Bag, Installing the Grass Bag, Mowing with the Grass Bag

Page 16

2.Release the wheel height adjustment lever and seat it securely in the notch.

3.Adjust all the wheels to the same cutting height setting.

Using the Grass Bag

Occasionally, you may wish to use the grass bag for bagging extra long grass, lush grass, or leaves.

Installing the Grass Bag

1.Stop the engine and wait for all moving parts to stop.

2.Ensure that the discharge door handle is fully forward and that the pin is engaged in the catch (Fig. 17).

1

2

 

3

 

m-1912

 

Figure 17

1. Bag frame on retaining

3. Handle fully forward.

post

Discharge door closed.

2.Pin engaged in catch

3.Slide the hole in the bag frame onto the retaining post

on the discharge tunnel (Fig. 17).

4.Set the rear of the bag frame onto the bag support rod.

5.Pull the discharge door handle forward until the pin clears the catch, and move the handle rearward until the pin locks in the bag notch (Fig. 18).

1

m-1913

Figure 18

1. Pin locked in bag notch

Note: The discharge door in the lawn mower housing is now open.

Mowing with the Grass Bag

Warning

A worn grass bag could allow small stones and other similar debris to be thrown in the operator's or bystander's direction and result in serious personal injury or death to the operator or bystanders.

Check the grass bag frequently. If it is damaged, install a new Exmark replacement bag.

Cut the grass until the bag is full.

Important Do not overfill the bag.

Removing the Grass Bag

1.Stop the engine and wait for all moving parts to stop.

2.Raise the discharge door handle and move it forward to engage the pin with the catch (Fig. 17).

3.Grasp the handles at the front and the rear of the bag and lift the bag off the lawn mower.

4.Gradually tip the bag forward to empty the clippings.

5.To install the bag, refer to Installing the Grass Bag on page 12.

Danger

If the discharge door does not close completely, the lawn mower could throw objects, causing serious personal injury or death.

If you cannot close the door because the grass clippings clog the discharge area, stop the engine and gently move the discharge door handle back and forth until you can close the door completely. If you still cannot close the door, remove the obstruction with a stick, not your hand.

Danger

The lawn mower can throw grass clippings and other objects through an open discharge tunnel. Objects thrown with enough force could cause serious personal injury or death to the operator or bystander.

Never open the door on the discharge tunnel when the engine is running.

12

Image 16
Contents M216KASPC Potential Hazard Exmark Parts PLUS Program Operators Manual Contents SpecificationsSafety General Lawn Mower SafetyIntroduction TrainingOperation Safety and Instruction Decals Exmark Lawn Mower SafetyMaintenance and Storage 74-1970 Installing the Handle AssemblyInstalling the Fuel Tank and the Fuel Line Before Starting Installing the Discharge Tunnel PlugFilling the Crankcase with Oil Filling the Fuel Tank with Gasoline GasolineOperation ControlsStarting the Engine Stopping the EngineUsing the Discharge Tunnel Plug Operating the Blade and the Self-Propel DriveChecking the Blade Brake Clutch Normal TestAdjusting the Cutting Height Test Using the Grass BagUsing the Grass Bag Installing the Grass BagMowing with the Grass Bag Removing the Grass BagCutting Grass Operating TipsCutting Leaves Maintenance Recommended Maintenance ScheduleCleaning the Underside of the Lawn Mower Housing Checking the Engine Oil LevelWashing Method Scraping MethodServicing the Air Filter Cleaning the Discharge Tunnel and PlugChanging the Engine Oil Inspecting the Blade Maintaining the BladeRemoving the Blade Cleaning the Blade Brake Clutch Shield Installing the BladeSharpening the Blade Balancing the BladeCleaning under the Belt Cover Emptying the Fuel Tank and Cleaning the Fuel FilterLubricating the Pivot Arms Servicing the Spark Plug Adjusting the Self-propel DriveChanging the Oil Filter Adjusting the Blade Brake Cable Lubricating the Gear CaseStorage Servicing the WheelsRemoving the Wheels Assembling the WheelsAccessories Preparing the Fuel SystemPreparing the Engine Removing the Lawn Mower from StorageTroubleshooting Problem Possible Causes Corrective ActionProblem Possible Causes Corrective Action Limited Warranty Exmark Turf Equipment Conditions and Products CoveredDescription Work Done Service Done By DateSee Exmarks Complete Line of Products for Turf Care

M216KASPC specifications

The Exmark M216KASPC is a high-performance, commercial-grade zero-turn mower designed to meet the rigorous demands of lawn maintenance professionals as well as discerning homeowners. This model is part of Exmark's innovative lineup, renowned for its durability, efficiency, and cutting-edge technology.

At the heart of the M216KASPC is its powerful Kohler EFI engine, offering robust performance with impressive fuel efficiency. The engine's electronic fuel injection system ensures optimal fuel delivery, which not only enhances performance but also reduces emissions and maintenance requirements. This engine is paired with a heavy-duty hydrostatic transmission that provides seamless power transfer and allows the mower to easily navigate various terrains.

One of the standout features of the Exmark M216KASPC is its 60-inch UltraCut Series 6 deck. With a design that promotes efficient airflow and a precise cutting height, this mower guarantees an exceptional cut quality and even grass distribution. The deck's dual-blade system is engineered to tackle dense turf with ease, ensuring that each pass leaves the lawn looking pristine.

The M216KASPC is equipped with Exmark’s proprietary seat and control system, which significantly enhances operator comfort and control. The ergonomically designed seat provides ample support during extended mowing sessions, while the intuitive control levers allow for precise maneuverability. This combination minimizes operator fatigue, enabling lawn care tasks to be completed more efficiently.

In addition to its impressive performance features, the Exmark M216KASPC boasts a range of technologies aimed at improving the mowing experience. With Smart Control technology, operators can easily adjust speed settings on the fly, allowing for tailored speed control based on specific mowing conditions. Furthermore, the mower's built-in hour meter and service reminders ensure that maintenance is kept on schedule, prolonging the life of the machine.

Durability is another hallmark of the M216KASPC, with a reinforced steel frame and high-quality components designed to withstand the rigors of commercial use. The tires are designed for superior traction and stability, ensuring that the mower can handle steep inclines and varied terrain without compromising performance.

In summary, the Exmark M216KASPC combines powerful performance, advanced technology, and operator comfort into one exceptional package. Whether for commercial landscaping businesses or dedicated homeowners, this zero-turn mower stands out as an ideal choice for achieving a beautifully maintained lawn. Its features reflect Exmark’s commitment to quality, making it a reliable workhorse in any yard care arsenal.