Exmark M216KASPC manual Lubricating the Gear Case, Adjusting the Blade Brake Cable

Page 25

Warning

Oil may be hot after the engine has been run, and contact with hot oil can cause sever personal injury.

Avoid contacting the hot engine oil when you drain it.

2.Stop the engine and wait for all moving parts to stop.

3.Disconnect the wire from the spark plug (Fig. 9).

4.Drain the engine oil; refer to Changing the Engine Oil on page 16.

5.Place a rag under the oil filter to catch any oil that may leak out as you remove the filter.

6.Remove the oil filter.

7.Use your finger to coat the gasket on the new filter with clean engine oil (Fig. 34).

1

m￿3862

Figure 34

1. Gasket

8.Install the new filter and hand tighten it 2/3 turn only.

9.Fill the crankcase to the Full line on the dipstick with fresh oil. Refer to Filling the Crankcase with Oil on page 7.

10.Connect the wire to the spark plug.

11.Run the engine for about 3 minutes.

12.Stop the engine, wait for all moving parts to stop, and check for oil leakage around the filter.

13.Add oil to compensate for the oil in the oil filter. Refer to Checking the Engine Oil Level on page 15.

14.Recycle the used oil filter according to local codes.

Lubricating the Gear Case

After every 100 operating hours, grease the gear case.

1.Remove the grass bag.

2.Install a grease gun onto the fitting through the belt cover opening (Fig. 35).

2

1

m-224

Figure 35

1. Belt cover

2. Grease fitting

 

 

3.Gently apply one to 2 pumps of #2 multi-purpose lithium-base grease.

4.Install the grass bag.

Adjusting the Blade Brake Cable

Whenever you install a new blade brake cable assembly or replace the blade brake belt, adjust the blade brake cable.

Warning

Overtightening the blade brake cable can cause the blade brake to fail to stop a rotating blade when you release the blade control bail. A rotating blade can cause serious personal injury.

•Check the blade brake each time you adjust the brake cable to ensure that the brake stops the blade in three seconds or less.

•If the blade does not stop rotating in three seconds or less, bring the lawn mower to an Authorized Service Dealer for repair.

1.Stop the engine and wait for all moving parts to stop.

2.Disconnect the wire from the spark plug (Fig. 9).

21

Page 24 Page 26
Image 25
Page 24 Page 26
Contents M216KASPC Potential Hazard Exmark Parts PLUS Program Operators Manual Specifications ContentsGeneral Lawn Mower Safety SafetyIntroduction TrainingOperation Safety and Instruction Decals Exmark Lawn Mower SafetyMaintenance and Storage 74-1970 Installing the Handle AssemblyInstalling the Fuel Tank and the Fuel Line Before Starting Installing the Discharge Tunnel PlugFilling the Crankcase with Oil Gasoline Filling the Fuel Tank with GasolineControls OperationStarting the Engine Stopping the EngineOperating the Blade and the Self-Propel Drive Using the Discharge Tunnel PlugChecking the Blade Brake Clutch Normal TestTest Using the Grass Bag Adjusting the Cutting HeightInstalling the Grass Bag Using the Grass BagMowing with the Grass Bag Removing the Grass BagCutting Grass Operating TipsCutting Leaves Recommended Maintenance Schedule MaintenanceChecking the Engine Oil Level Cleaning the Underside of the Lawn Mower HousingWashing Method Scraping MethodServicing the Air Filter Cleaning the Discharge Tunnel and PlugChanging the Engine Oil Inspecting the Blade Maintaining the BladeRemoving the Blade Installing the Blade Cleaning the Blade Brake Clutch ShieldSharpening the Blade Balancing the BladeCleaning under the Belt Cover Emptying the Fuel Tank and Cleaning the Fuel FilterLubricating the Pivot Arms Servicing the Spark Plug Adjusting the Self-propel DriveChanging the Oil Filter Lubricating the Gear Case Adjusting the Blade Brake CableServicing the Wheels StorageRemoving the Wheels Assembling the WheelsPreparing the Fuel System AccessoriesPreparing the Engine Removing the Lawn Mower from StorageProblem Possible Causes Corrective Action TroubleshootingProblem Possible Causes Corrective Action Conditions and Products Covered Limited Warranty Exmark Turf EquipmentDate Description Work Done Service Done BySee Exmarks Complete Line of Products for Turf Care

M216KASPC specifications

The Exmark M216KASPC is a high-performance, commercial-grade zero-turn mower designed to meet the rigorous demands of lawn maintenance professionals as well as discerning homeowners. This model is part of Exmark's innovative lineup, renowned for its durability, efficiency, and cutting-edge technology.

At the heart of the M216KASPC is its powerful Kohler EFI engine, offering robust performance with impressive fuel efficiency. The engine's electronic fuel injection system ensures optimal fuel delivery, which not only enhances performance but also reduces emissions and maintenance requirements. This engine is paired with a heavy-duty hydrostatic transmission that provides seamless power transfer and allows the mower to easily navigate various terrains.

One of the standout features of the Exmark M216KASPC is its 60-inch UltraCut Series 6 deck. With a design that promotes efficient airflow and a precise cutting height, this mower guarantees an exceptional cut quality and even grass distribution. The deck's dual-blade system is engineered to tackle dense turf with ease, ensuring that each pass leaves the lawn looking pristine.

The M216KASPC is equipped with Exmark’s proprietary seat and control system, which significantly enhances operator comfort and control. The ergonomically designed seat provides ample support during extended mowing sessions, while the intuitive control levers allow for precise maneuverability. This combination minimizes operator fatigue, enabling lawn care tasks to be completed more efficiently.

In addition to its impressive performance features, the Exmark M216KASPC boasts a range of technologies aimed at improving the mowing experience. With Smart Control technology, operators can easily adjust speed settings on the fly, allowing for tailored speed control based on specific mowing conditions. Furthermore, the mower's built-in hour meter and service reminders ensure that maintenance is kept on schedule, prolonging the life of the machine.

Durability is another hallmark of the M216KASPC, with a reinforced steel frame and high-quality components designed to withstand the rigors of commercial use. The tires are designed for superior traction and stability, ensuring that the mower can handle steep inclines and varied terrain without compromising performance.

In summary, the Exmark M216KASPC combines powerful performance, advanced technology, and operator comfort into one exceptional package. Whether for commercial landscaping businesses or dedicated homeowners, this zero-turn mower stands out as an ideal choice for achieving a beautifully maintained lawn. Its features reflect Exmark’s commitment to quality, making it a reliable workhorse in any yard care arsenal.
Top Page Image Contents