Loading a Unit

Operation

WARNING

Loading a unit on a trailer or truck increases the possibility of backward tip-over. Backward tip-over could cause serious injury or death.

•Use extreme caution when operating a unit on a ramp.

•Use only a single, full width ramp; Do Not use individual ramps for each side of the unit.

•If individual ramps must be used, use enough ramps to create an unbroken ramp surface wider than the unit.

•Do Not exceed a 15° angle between ramp and ground or between ramp and trailer or truck.

•Avoid sudden acceleration while driving unit up a ramp to avoid tipping backward.

•Avoid sudden deceleration while backing unit down a ramp to avoid tipping backward.

Empty grass bags before attempting to load unit on trailer or truck. Use extreme caution when loading units on trailers or trucks. One full width ramp that is wide enough to extend beyond the rear tires is recommended instead of individual ramps for each side of the unit. The lower rear section of the tractor frame extends back between the rear wheels and serves as a stop for tipping backward. Having a full width ramp provides a surface for the frame members to contact if the unit starts to tip backward. If it is not possible to use one full width ramp, use enough individual ramps to simulate a full width continuous ramp.

Ramp should be long enough so that the angles between the ramp and the ground and the ramp and the trailer or truck Do Not exceed 15°. A steeper angle may cause mower deck components to get caught as the unit moves from ramp to trailer or truck. Steeper angles may also cause the unit to tip backward. If loading on or near a slope, position the trailer or truck so it is on the down side of the slope and the ramp extends up the slope. This will

minimize the ramp angle. The trailer or truck should be as level as possible.

Important: Do Not attempt to turn the unit while on the ramp, you may lose control and drive off the side.

Avoid sudden acceleration when driving up a ramp and sudden deceleration when backing down a ramp. Both maneuvers can cause the unit to tip backward.

Lazer Z AS specifications

The Exmark Lazer Z AS is a premier riding mower, designed to deliver exceptional performance and efficiency for both commercial landscapers and residential users. Known for its robust build quality and advanced engineering, the Lazer Z AS stands out in the crowded mower market, offering a blend of power, precision, and user comfort.

One of the main features of the Lazer Z AS is its exceptional cutting capability. It is equipped with a durable, high-capacity cutting deck available in various sizes, typically ranging from 48 to 72 inches. This allows for efficient mowing of large areas while delivering a clean, professional-grade cut. The innovative mower deck design promotes superior grass collection and boasts an advanced airflow system to ensure even cutting, whether dealing with thick, wet grass or dry, tall blades.

Technologically, the Lazer Z AS integrates Exmark's patented ECS (Enhanced Control System) for unrivaled maneuverability and control. The ECS allows operators to adjust the speed and direction of the mower with precision, reducing operator fatigue and increasing productivity. The mower's low center of gravity enhances stability, making it easier to navigate slopes and uneven terrain, which is crucial for both residential and commercial mowing jobs.

Another key aspect of the Lazer Z AS is its powerful engine options. It typically features high-performance engines from trusted brands like Kohler or Kawasaki, providing the necessary horsepower for demanding applications. These engines are designed for fuel efficiency and reduced emissions, aligning with modern environmental standards while offering reliable starting and performance.

Comfort is also a priority with the Lazer Z AS. The ergonomically designed seat includes multiple adjustments for optimal support, while the vibration-dampening system enhances operator comfort during extended mowing sessions. Additionally, the intuitive control layout ensures that operators have easy access to all essential functions without distraction.

Durability is a hallmark of the Exmark brand, and the Lazer Z AS is no exception. Built with heavy-duty materials and components, this mower is designed to withstand the rigors of daily use. Its reinforced frame and robust wheels contribute to its longevity and reliability in various mowing conditions.

In conclusion, the Exmark Lazer Z AS combines advanced features, innovative technologies, and user-friendly characteristics to provide an exceptional mowing experience. It's an investment that promises efficiency, durability, and high-quality performance for any lawn care professional or homeowner looking to achieve a pristine lawn.