Lubricate Grease Fittings

Maintenance

Note: See chart for service intervals.

1.Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.

2.Lubricate fittings with NGLI grade #2 multi-purpose gun grease.

Refer to the following chart for fitting locations and lubrication schedule.

Lubrication Chart

Fitting	Initial	Number of	Service
Locations	Pumps	Places	Interval
1. Idler	1–2	1	25 Hours
Bushings

Check Condition of Belt

Service Interval: Every 50 hours

All Units

1.Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.

2.Inspect the belt for damage or wear. Replace belt with one of the following:

Deck	Part No.

52 inch–All	1–653438

60 inch Lazer Z, XS, XP	103-0866
SN 599,999 and Lower and
All Lazer AS
72 inch All SN 599,999	103-0867
and Lower
60 inch Triton	109-1242
66 inch Triton	103-0867
72 inch Triton	109-1244

For 52 inch Units Only-Belt Replacement Procedure:

1.Remove the blower from the deck.

2.Remove the belt guide on the blower (see Figure 9).

Figure 9

View From Top of Blower

1.	Spring loaded idler	4.	Belt guide
2.	Impeller sheave	5.	Deck sheave (reference)

3.Fixed idler

3.Remove the old belt.

4.Install the new belt onto the blower assembly as shown in Figure 9.

5.Reinstall the belt guide removed in step 2.

6.Reinstall the blower onto the deck.

For 52 inch Units Only-Inspect Belt Position on the Idler Arm:

The idler arm may become bent during use or transport. A bent idler arm could cause the belt to jump off of the idler and be damaged.

1.Make sure the belt cover is installed and run the blower for one to two minutes.

2.Shut off the deck drive, stop engine, wait for all moving parts to stop and remove key. Engage parking brake. Remove the belt cover and check to make sure that the belt is riding near the center of the flat idler on the idler arm.

3.If the belt is not riding near the center of the idler, remove the blower, and bend the idler arm slightly.

4.Reinstall the blower and belt cover and repeat steps 1 through 3 until the belt is positioned near the center of the idler.

Lazer Z AS specifications

The Exmark Lazer Z AS is a premier riding mower, designed to deliver exceptional performance and efficiency for both commercial landscapers and residential users. Known for its robust build quality and advanced engineering, the Lazer Z AS stands out in the crowded mower market, offering a blend of power, precision, and user comfort.

One of the main features of the Lazer Z AS is its exceptional cutting capability. It is equipped with a durable, high-capacity cutting deck available in various sizes, typically ranging from 48 to 72 inches. This allows for efficient mowing of large areas while delivering a clean, professional-grade cut. The innovative mower deck design promotes superior grass collection and boasts an advanced airflow system to ensure even cutting, whether dealing with thick, wet grass or dry, tall blades.

Technologically, the Lazer Z AS integrates Exmark's patented ECS (Enhanced Control System) for unrivaled maneuverability and control. The ECS allows operators to adjust the speed and direction of the mower with precision, reducing operator fatigue and increasing productivity. The mower's low center of gravity enhances stability, making it easier to navigate slopes and uneven terrain, which is crucial for both residential and commercial mowing jobs.

Another key aspect of the Lazer Z AS is its powerful engine options. It typically features high-performance engines from trusted brands like Kohler or Kawasaki, providing the necessary horsepower for demanding applications. These engines are designed for fuel efficiency and reduced emissions, aligning with modern environmental standards while offering reliable starting and performance.

Comfort is also a priority with the Lazer Z AS. The ergonomically designed seat includes multiple adjustments for optimal support, while the vibration-dampening system enhances operator comfort during extended mowing sessions. Additionally, the intuitive control layout ensures that operators have easy access to all essential functions without distraction.

Durability is a hallmark of the Exmark brand, and the Lazer Z AS is no exception. Built with heavy-duty materials and components, this mower is designed to withstand the rigors of daily use. Its reinforced frame and robust wheels contribute to its longevity and reliability in various mowing conditions.

In conclusion, the Exmark Lazer Z AS combines advanced features, innovative technologies, and user-friendly characteristics to provide an exceptional mowing experience. It's an investment that promises efficiency, durability, and high-quality performance for any lawn care professional or homeowner looking to achieve a pristine lawn.