Exmark Lazer Z AS manual Maintenance, Check Blower Housing/Impeller, Check Bags

Page 17

Maintenance

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

WARNING

While maintenance or adjustments are being made, someone could start the engine. Accidental starting of the engine could seriously injure you or other bystanders.

Remove the key from the ignition switch, engage parking brake, and pull the wire(s) off the spark plug(s) before you do any maintenance. Also push the wire(s) aside so it does not accidentally contact the spark plug(s).

WARNING

The engine can become very hot. Touching a hot engine can cause severe burns.

Allow the engine to cool completely before service or making repairs around the engine area.

Recommended Maintenance Schedule(s)

Maintenance Service

Maintenance Procedure

Interval

 

 

 

 

 

• Check the blower housing/impeller.

Before each use or daily

•

Check bags.

• Clean muffler and rear frame area.

 

 

• Clean rear screen in the hood.

 

 

 

Every 25 hours

•

Lubricate grease fittings.

 

 

 

Every 50 hours

•

Check condition of belt.

 

 

 

Yearly or before storage

•

Clean blower.

 

 

 

Periodic Maintenance

Check Blower

Housing/Impeller

Service Interval: Before each use or daily

1.Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.

2.Inspect for wear or damage daily. Replace or repair worn parts as needed

Note: When mowing in areas with sandy soil, use low lift blades on the cutting deck and higher cutting heights to minimize wear on the blower components.

Check Bags

Service Interval: Before each use or daily

1.Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.

2.Inspect the bags for wear, tears, or damage.

WARNING

Under normal use the bag will deteriorate and wear. Objects could exit through worn bag at high speeds. Thrown objects can cause serious injury or kill you or bystanders.

Check bags frequently for tears and holes. Replace worn bags.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Ultra VAC All Rights Reserved Introduction Contents Safe Operating Practices SafetySafety Alert Symbol Slope Operation Maintenance and Storage Safety and Instructional Decals 103-3507 Dimensions SpecificationsModel Numbers SystemsTorque Requirements Curb WeightProduct Overview Pre-Start OperationOperating Instructions MowingViewed from the right side Bagger Installation for Bagging Transporting a Unit TransportingLoading a Unit Check Bags MaintenanceCheck Blower Housing/Impeller Check Condition of Belt Lubricate Grease FittingsClean Blower Clean Muffler and Rear Frame AreaClean Rear Screen In Hood Problem Possible Cause Corrective Action TroubleshootingYear Limited Warranty Exmark Turf Equipment Service Record Page See EXMARK’S Complete Line of Accessories

Lazer Z AS specifications

The Exmark Lazer Z AS is a premier riding mower, designed to deliver exceptional performance and efficiency for both commercial landscapers and residential users. Known for its robust build quality and advanced engineering, the Lazer Z AS stands out in the crowded mower market, offering a blend of power, precision, and user comfort.

One of the main features of the Lazer Z AS is its exceptional cutting capability. It is equipped with a durable, high-capacity cutting deck available in various sizes, typically ranging from 48 to 72 inches. This allows for efficient mowing of large areas while delivering a clean, professional-grade cut. The innovative mower deck design promotes superior grass collection and boasts an advanced airflow system to ensure even cutting, whether dealing with thick, wet grass or dry, tall blades.

Technologically, the Lazer Z AS integrates Exmark's patented ECS (Enhanced Control System) for unrivaled maneuverability and control. The ECS allows operators to adjust the speed and direction of the mower with precision, reducing operator fatigue and increasing productivity. The mower's low center of gravity enhances stability, making it easier to navigate slopes and uneven terrain, which is crucial for both residential and commercial mowing jobs.

Another key aspect of the Lazer Z AS is its powerful engine options. It typically features high-performance engines from trusted brands like Kohler or Kawasaki, providing the necessary horsepower for demanding applications. These engines are designed for fuel efficiency and reduced emissions, aligning with modern environmental standards while offering reliable starting and performance.

Comfort is also a priority with the Lazer Z AS. The ergonomically designed seat includes multiple adjustments for optimal support, while the vibration-dampening system enhances operator comfort during extended mowing sessions. Additionally, the intuitive control layout ensures that operators have easy access to all essential functions without distraction.

Durability is a hallmark of the Exmark brand, and the Lazer Z AS is no exception. Built with heavy-duty materials and components, this mower is designed to withstand the rigors of daily use. Its reinforced frame and robust wheels contribute to its longevity and reliability in various mowing conditions.

In conclusion, the Exmark Lazer Z AS combines advanced features, innovative technologies, and user-friendly characteristics to provide an exceptional mowing experience. It's an investment that promises efficiency, durability, and high-quality performance for any lawn care professional or homeowner looking to achieve a pristine lawn.
Top Page Image Contents