Operation
Product Overview
| Figure 4 |
| |
1. | Hopper | 4. | Blower |
2. | Toeboard weight | 5. | Tube |
3. | Caster weight (LZUV3B | 6. | Bag |
| Units Only) |
|
|
|
|
|
|
Operation
Note: Determine the left and right sides of the machine from the normal operating position.
Important: For Serial Numbers 790,000 and higher, multiple accessories added to a base unit can change the stability of the machine. Read the unit operator’s manual to determine if counterbalance weights are necessary for the accessories installed on the unit.
Important: Due to the added weight of the Ultra Vac, it is important to ensure the parking brake on your mower is adjusted properly. Before installing the Ultra Vac, make sure to
Pre-Start
Make sure you understand the controls, their locations, their functions, and their safety requirements.
Ensure the blower, belt cover, bags, tubes and hopper are in good condition, properly attached, and latched.
Important: Verify that the reinforced bumpers are installed on your unit prior to operation.
Refer to the Maintenance section and perform all the necessary inspection and maintenance steps.
Operating Instructions
Mowing
1.The Ultra Vac blower operates when the PTO is engaged. Be sure that all persons are clear of the mower deck before engaging the cutting blades. Set the throttle to “midway” position. Pull outward on the PTO switch to the “ROTATE” position. Accelerate to full throttle to begin mowing.
2.To disengage the PTO, set the throttle to “midway” position. Push in on the PTO switch to the “STOP” position to stop the cutting blades and blower. The cutting blades will require a slightly longer amount of time to come to a complete stop when the blower is installed on the deck. Verify that all rotation indicators have
11