Exmark 4500-352 Dimensions, Torque Requirements, Cutting Deck, Overall Length, Overall Height

Page 13

Cutting Deck

Specifications

Cutting Deck

•Cutting Width:

–32 inch Deck: 31.75 inches (80.7 cm)

–36 inch Deck: 35.38 inches (89.9 cm)

–48 inch Deck: 47.25 inches (120.0 cm)

•Discharge: Side

•Blade Size:

–32 inch Deck: 16.25 inches (41.3 cm) —

Quantity: 2

–36 inch Deck: 18.00 inches (45.7 cm)—

Quantity: 2

–48 inch Deck: 16.25 inches (41.3 cm)—

Quantity: 3

•Deck Drive: Manual engagement of belt with over-center lock. Blade belt tension is adjustable via turnbuckle.

•Blade Brake: When the blade engagement control is moved to the disengaged position a friction brake pad stops the rotation of the blades.

•Deck Mounting: Bolted directly to engine deck.

•Deck Depth:

–32 inch Deck: 5.0 inches (12.7 cm)

–36 inch Deck: 5.0 inches (12.7 cm)

–48 inch Deck: 5.0 inches (12.7 cm)

•Cutting Height Adjustment:

Adjusts from 1 inch (2.5 cm) to 4 1/4 inches (10.8 cm) in 1/4 inch (6.4 mm) or smaller increments by various adjustments of caster spacers, blade spacers, and axle height.

Overall Length:

	32 inch	36 inch	48 inch
	Deck	Deck	Deck
Standard	78.0 inches	78.0 inches	73.0 inches
Pistol Grip	(198.1 cm)	(198.1 cm)	(185.4 cm)
Handles
ECS	77.3 inches	77.3 inches	72.3 inches
Handles	(196.3 cm)	(196.3 cm)	(183.6 cm)

Overall Height:

Standard Pistol Grip	40.0 inches (101.6 cm)
Handles

ECS Handles	42.1 inches (106.9 cm)

Tread Width: (Outside to Outside of Tires, Widthwise)

	32 inch	36 inch	48 inch
	Deck	Deck	Deck
Standard	32.1 inches	35.6 inches	35.6 inches
Pistol Grip	(81.4 cm)	(90.4 cm)	(90.4 cm)
& ECS
Handles

Curb Weight:

	32 inch	36 inch	48 inch
	Deck	Deck	Deck
Standard	420 lb	430 lb	475 lb
Pistol Grip	(191 kg)	(195 kg)	(215 kg)
Handles
ECS	435 lb	446 lb	490 lb
Handles	(197 kg)	(202 kg)	(222 kg)

Dimensions

Overall Width:

	32 inch	36 inch	48 inch
	Deck	Deck	Deck
Deflector	32.7 inches	36.4 inches	48.1 inches
Up	(83.1 cm)	(92.5 cm)	(122.2 cm)
Deflector	43.3 inches	47.0 inches	57.9 inches
Down	(110.0 cm)	(119.4 cm)	(147.1 cm)

Torque Requirements

Bolt Location	Torque
Blade/Cutter Housing	75-80 ft-lb (102-109 N-m)
Spindle Bolt
Caster Bracket Mounts	30-35 ft-lb (41-48 N-m)
Mower Deck/Engine	30-35 ft-lb (41-48 N-m)
Deck Mount
Engine Mounting Bolts	15-20 ft-lb (20-27 N-m)

Transmission Shifter Lever	30-35 ft-lb (41-48 N-m)
Nut

13

Image 13

Contents For Serial Nos 790,000 & Higher METROCALIFORNIA Proposition 65 Warning Model No Serial No IntroductionContents Safety Alert Symbol SafetySafety ALERT! YOUR SAFETY IS INVOLVEDAvoid prolonged breathing of vapors DANGERKeep face away from nozzle and gas tank/container opening Keep away from eyes and skin Never siphon by mouthSlope Operation OperationAllow engine parts, especially the muffler, to cool before touching Remove accumulated debris from muffler and engine areaDo Not mow slopes when grass is wet Maintenance and StorageMow across slopes, never up and down Do Not mow near drop-offs or near waterSafety and Instructional Decals ECS Units Only Pistol Grip Units Only 48 inch Units OnlySpecifications SpecificationsSafety Interlock System Model NumbersCurb Weight DimensionsTorque Requirements Cutting DeckOperation Product OverviewControls OperationDrive Levers “Off-Run” SwitchNeutral Lock/Park Brake Latches Choke ControlOperating Instructions Pre-StartOpen the Fuel Shut-Off Valve Starting the EngineDrive Lever/Neutral Lock/Park Brake Latch Operation Driving the MachineFor Pistol Grip Handles For ECS HandlesTransporting If necessary, use assistance when loadingChanging Gears Transporting a UnitRecommended Maintenance Schedules MaintenanceMaintenance Service Interval Before each use or daily Periodic MaintenanceService Interval As required Check Engine Oil LevelService Pre-Cleaner Element and Air Cleaner Check Safety Interlock SystemSERVICE DEALER Service Interval After the first 5 hoursNote See chart for service intervals Service Interval Every 40 hoursCheck Tire Pressures Check Condition Of BeltsCheck Spark Plugs Service Interval Every 160 hoursChange Fuel Filter Yearly-Replace gearbox greaseAdjusting the Cutting Height AdjustmentsThread Locking Adhesives Mobil HTS Grease Or Food-Grade Anti-seizeAxle CuttingNumber Of Spacers HeightAdjusting the Axle Position Adjusting the Cutting Height with Blade Spacers Adjusting the Number of Spacers below Caster Support HubTransmission Belt Adjustment 3. Place the drive levers in the “park brake” positionEngine to Mower Deck Belt Wheel Drive Belt Pulley Scrapers48 inch Deck Shown for Reference Only Belt Guide Adjustment Blade Brake AdjustmentBrake and Wheel Drive Linkage Adjustment Right Side of Unit Shown Shifter Lever AdjustmentPTO Safety Switch Adjustment Shifter Detent AdjustmentHandle Height Adjustment Upper Handle Wheel Drive Spring Tension AdjustmentUpper Hole More traction applied asClean Engine and Exhaust System Area CleaningClean Debris From Machine Remove Engine Shrouds and Clean Cooling FinsTroubleshooting TroubleshootingCutting blades is/are bent or unbalanced Schematics Schematics2 Year Limited Warranty Exmark Commercial Turf EquipmentInstructions for Obtaining Warranty Service Owner’s ResponsibilitiesPage MID-MOUNT RIDING ACCESSORIES AND OPTIONS SEE EXMARK’S COMPLETE LINE OF ACCESSORIES AND OPTIONSOUT-FRONT RIDING ACCESSORIES AND OPTIONS WALK-BEHIND ACCESSORIES AND OPTIONS