Flymo VTR32, VM032, RM032 Assembly Instructions, Loose Parts Pack is packaged underneath the deck

Page 4

Assembly Instructions

A

3

2

1

The Loose Parts Pack is packaged underneath the deck.

Assembly of Lower Handles to Deck

1.

Place the bolt (A2) through the hole in the lower handle

2.

(A1) until the lower handle fits into the recess (A3)

Place the washer (B1) and the wing knob (B2) on to

3.

the bolt and tighten the wing knob.

Repeat on the other side.

Assembly of Upper Handles to Lower Handles.

1.

Ensure the upper handle is located correctly with the

B

1

2

C

1

3

 

4

5

2

2.

lock-off button on the switchbox uppermost.

Ensure the upper handle (C1) and the lower handle

4.

(C2) are aligned correctly.

Fit the bolts (C3), washers (C4) and wing knobs (C5).

5.

Tighten the wing knob.

Fit the cable to the handles with the clips provided.

 

Make sure the cable is not trapped between the upper

 

and lower handles.

Grassbox Assembly

1.

Slide the grassbox tongue into the slots in the grassbox

2.

lower until it clicks securely into position (D)

Push the grassbox handle into the slots in the grassbox

3.

upper until it clicks securely into position. (E)

Starting at the rear of the grassbox, locate the grass-

 

box upper into the grassbox lower by aligning the clips

 

(F1). Ensure all clips are correctly located.(F2) before

4.

clicking into position.

Clip the two halves together, ensuring all clips are se-

 

curely connected.

D

E

F1

F2

Image 4
Contents Venturer 32 VTR32 Carton Contents SafetyMaintenance and storage ElectricalPreparation UseAssembly Instructions Assembly of Lower Handles to DeckAssembly of Upper Handles to Lower Handles Grassbox AssemblyCutting Height Adjustment GrassboxFitting Fully Assembled Grassbox to Lawnmower Grassbox Full Window Visimo OnlyHow to Mow Starting and StoppingThermal Cut-Out Removing and Fitting the BladeFault Finding Hints Caring for your LawnmowerService Recommendations Replacement PartsFailures not covered by guarantee All of the centres listed stock genuine Spare PartsEC Declaration of Conformity Width of Cut cm Speed of Rotation of Cutting Device RPM
Related manuals
Manual 10 pages 22.42 Kb Manual 10 pages 54.87 Kb Manual 72 pages 45.35 Kb