Grassbox
G1
3
2
H
J | Visimo Only |
| grassbox |
| empty |
| grassbox |
| full |
Fitting Fully Assembled Grassbox to Lawnmower.
1.Lift safety flap (G1)
2.Make sure the discharge chute is clean and free from debris (G2)
3.Locate fully assembled grassbox onto 2 location points (G3) at the rear of the deck as illustrated in pic. H
4.Locate safety flap onto the top of the grassbox. En- sure the grassbox is securely located.
•IMPORTANT !
AFTER FITTING ENSURE NO GAP REMAINS BE- TWEEN THE SAFETY FLAP AND THE GRASSBOX.
•Removal is the reverse procedure.
•For larger areas of grass where grass collection is not required you can use your lawnmower without the grassbox. Ensure the Safety Flap is fully closed. The design of the safety flap permits the cut grass to be discharged downward behind the machine.
Grassbox Full Window (Visimo Only)
•As the grassbox fills up, grass will be visible through the window (J).
•When the window/grassbox is full it is time to empty the grassbox.
Cutting Height Adjustment
K
2cm
4cm 6cm
Cutting Height Adjustment (K) & (L)
•Height of cut is adjusted by raising or lowering the Front and Rear Wheels.
•There are five heights of cut on this product.
•NOTE
A medium height of cut is recommended for most lawns.
The quality of your lawn will suffer and collection will be poor if you cut too low.
L
HEIGHT OF CUT | WHEELS POSITION |
Low | Front position 2cm |
Low to Medium | Rear position 2cm |
Front position 2cm | |
Medium | Rear position 4cm |
Front position 4cm | |
Medium to High | Rear position 4cm |
Front position 4cm | |
High | Rear position 6cm |
Front position 6cm | |
| Rear position 6cm |