ZMT Owner’s Manual
Figure B
WARNING: All Operations Must Be Done Without The PTO Sharft Mounted.
4.3Attachment to and Detachment from the Tractor
Before carrying out this operation and whenever the shredder is used, it is important to:
•Visually check the machine in general.
•Check that all guards are fitted and in good condition.
•Confirm that all flails are fitted and in good condition.
•Grease the bearings and any other part as indicated by a decal (Figure 21).
•Check that all hydraulic pipes are in good condition, look for signs of leakage beneath the machine.
•Check that the number or revolutions and the rotational direction of the power take off correspond to those required by the shredder (Figure 7).
Figure 7
10