ZMT Owner’s Manual
6USE AND OPERATING RULES
6.1Ram control
6.1.1The ram control levers of the shredder are placed inside the cab and are part of the shredder. This delivers the hydraulic power necessary to run the shredder.
•Ram (1) (Figure 15) controls the adjustment of the flail head.
•Ram (2) controls side movement of the flail head.
Figure 15
6.1.2Controls with distributor (OPTIONAL)
For tractors equipped with just one pressure tube or when requested by the user, a distributor for ram control can be fitted to the shredder. This is also equipped with a floating position to control the ram (1) (Figure 15).
6.2Starting
•Before using the shredder check the tightness of all bolts and the integrity of all guards. Check that the number of revolutions and the rotational direction of the power takeoff of the tractor correspond to those required by the shredder, see decal on the gearbox (Figure 7).
•Engage the power takeoff at low engine RPM (without jerking) to avoid damaging the transmission (gearbox and belts).
14