Gefen

CONNECTING AND OPERATING

THE GEFENTOOLBOX 1:4 SPLITTER FOR HDMI WITH FST

How to Connect the GefenToolBox 1:4 Splitter for HDMI with FST

1.Use the supplied HDMI cable to connect the source device to the HDMI input port of the GefenToolBox 1:4 Splitter for HDMI with FST.

2.Use additional user-supplied HDMI cables to connect up to four (4) HDTV displays to the output ports on the 1:4 Switcher for HDMI with FST.

3.Connect the included 5V DC power supply to the power receptacle on the Splitter.

4.Connect the other end of the power supply to an available power outlet.

How to Operate the GefenToolBox 1:4 Splitter for HDMI with FST

The GefenToolBox 1:4 Splitter for HDMI with FST does not require any conﬁguration to begin splitting the incoming HDMI input signal. However, depending on the features required by the user, the EDID Mode and Audio Channel Selection switches may need to be adjusted. Please see the following section for more information on the usage of these switches.

HDMI CABLE

HDMI Source

HDMI Display

HDMI Splitter

HDMI Display

GTB-HDFST-144

Wiring Diagram for the GefenToolBox 1:4 Splitter for HDMI with FST