TESTING
❒Turn on the circuit breaker and light switch.
NOTE: Sensor has a 1 1/2 minute warm up pe- riod before it will detect motion.When first turned on, wait 1 1/2 minutes.
❒Switch the
|
|
|
|
|
|
TEST 1 5 10 MIN | OFF 3 6 DUSK TO | ||||
|
| HOUR DAWN |
Avoid aiming the control at:
•Objects that change temperature rapidly, such as heating vents and air condition- ers. These heat sources could cause false triggering.
•Areas where pets or traffic may trigger the control.
•Nearby large,
6 ft. | 180° |
| |
(1.8 m) |
|
30ft.
(9.1 m)
Maximum Range | Maximum |
| Coverage Angle |
The detector is less sensitive to motion directly towards it and more sensitive to across motion.
Motion | Motion |
| |
| Sensor |
Least Sensitive | Most Sensitive |
❒Walk through the coverage area noting where you are when the lights turn on.
❒If you need to change the sensitivity, temporarily remove the fixture and make the adjustment. Too much sensitivity may increase false triggering.
❒Set the amount of TIME you want the light to stay on after motion is detected. (1, 5, or 10 minutes).
❒Set the amount of time after dusk you want the lights on accent level.
SPECIFICATIONS
Range . . . . . . . . . . . . Up to 30 ft. (9.1 m) [varies with s u r r o u n d i n g temperature].
Sensing Angle . . . . . . Up to 180° Electrical Load. . . . . . S e e r a t i n g o n
fixture for maximum wattage.
Sensor Capacity . . . . Up to 360 Watt (3.0 A.) Maximum
Power Requirements . 120 VAC, 60 Hz Operating Modes . . . . TEST, AUTO and
MANUAL MODE Time Delay . . . . . . . . 1, 5, 10 minutes DUALBRITE® timer . . . . 3, 6 hrs,
Dawn
DESA Specialty Products™ reserves the right to discontinue products and to change specifications at any time without incurring any obligation to incorporate new features in products previously sold.
5 |