Mounting and Operating Instructions

Installation & Operation Manual	Infrared Electric Patio Heater	Heat Controller

SPECIFICATIONS

Congratulations on your purchase of the Comfort-Aire® Electric Portable Infrared Patio Heater.This heater utilizes medium-wave technology that heats people and objects, not the air, and is unaffected by wind. For best results and your safety, follow the instructions carefully. Do NOT modify this product in any way as the manufacturer will not accept liability for improper use.

Model:	IRPH15SS
Voltage:	120V AC
Emitter (Lamp):	IRRL15120
	(Medium wave infrared)
Power :	MAX 1500W
Height:	82 inches (2100mm)
Width:	24 inch base (600mm)

ASSEMBLING THE UNIT (Follow diagrams below)

1.Thread the 6 leveling feet into the holes around the bottom of the base. (Figure 1)

2.Attach the flanged column to the base with (4) M8 bolts, using the supplied hex wrench. (Figure 1)

3.Mount the lamp to the terminal box with M6 screw and nut. (Figure 2)

4.Connect the terminal box to the upper column with (4)

M5 bolts. Be sure to feed the attached power cord into the upper column. (Figure 3)

5.Connect the center column to the upper column by screwing clockwise. Do not over- tighten.

6.Insert the cable plug into the cable socket. Feed the cord through the lower column and out the bottom of the base. Connect the center column to the lower column byscrewing clockwise. Do not over- tighten. (Figure 4)

7.Pull gently on the cable at the bottom of the base to keep it taut. Fix the cable to the base with the cable clamp and

(2) M4 screws.

(Figure 5)