Heat Controller | Infrared Electric Patio Heater | Installation & Operation Manual |
|
|
|
OPERATION
1.Plug the power cord into a GFCI protected outlet
2.Turn ON the heater by pressing the red switch mounted on the side
of the heater to the ON (I)
3.To turn OFF the heater, press the red switch on the side of the heater to the OFF
(O) position. The switch will no longer be illuminated.
4.Remove the plug from the power outlet whenever the heater is not being used. Coil the power cord when the heater is not being used, so that it is not a safety hazard.
5.Allow the heater to cool down after use.
6.The heater should be stored in a dry location when not in use. Particular care should be taken to ensure that the plug is not subjected to water or damp
CLEANING AND STORAGE
1.Your heater is a robust aluminum unit with a strong mast and base, and requires only minimal maintenance. There are no user serviceable parts inside.
2.Before cleaning, turn the unit OFF and remove the plug from the power outlet. Wait until the heater has cooled down.
3.Clean with a
4.Never use abrasive cleaners, scrubbing brushes or chemical cleaners on the heater, column or base.
WARNING
PERSONAL INJURY HAZARD
5.To protect against electric shock and danger of death, do not immerse cord, plug, or any part of the heater in water or other liquid.
6.Store the heater in a dry location when not in use. Take special care to ensure that the plug is not subjected to damp or wet conditions during storage.
5