Husqvarna 137, 142 instruction manual Kickback Safety Features, Chain Brake

Page 5

Elbow locked

Thumb on underside of handlebar

SKeep a good, firm grip on the saw with both hands when the engine is running and don’t let go. A firm grip will help you reduce kickback and maintain control of the saw. Keep the fingers of your left hand encir- cling and your left thumb under the front handlebar. Keep your right hand com- pletely around the rear handle whether your are right handed or left handed. Keep

your left arm straight with the elbow locked.

SPosition your left hand on the front handle- bar so it is in a straight line with your right hand on the rear handle when making

bucking cuts. Never reverse right and left hand positions for any type of cutting.

SStand with your weight evenly balanced on

both feet.

SStand slightly to the left side of the saw to keep your body from being in a direct line

with the cutting chain.

SDo not overreach. You could be drawn or thrown off balance and lose control of the

saw.

SDo not cut above shoulder height. It is diffi- cult to maintain control of saw above shoulder height.

KICKBACK SAFETY FEATURES

WARNING: The following features are included on your saw to help reduce the hazard of kickback; however, such features will not totally eliminate this danger. As a chain saw user, do not rely only on safety de- vices. You must follow all safety precau- tions, instructions, and maintenance in this manual to help avoid kickback and other forces which can result in serious injury.

SReduced--Kickback Guide Bar, designed with a small radius tip which reduces the size of the kickback danger zone on the bar tip. A Reduced--Kickback Guide Bar has been demonstrated to significantly re- duce the number and seriousness of kick- backs.

Reduced Kickback Symmetrical Guide Bar

Small Radius Tip

Symmetrical Guide Bar

Large Radius Tip

S Low--Kickback Chain, designed with a contoured depth gauge and guard link which deflect kickback force and allow wood to gradually ride into the cutter.

Low--- Kickback

 

Chain

Contoured Depth Gauge

 

Elongated Guard Link

Deflects

Kickback Force

And Allows Wood

To Gradually

Ride Into Cutter

SFront Hand Guard, designed to reduce the chance of your left hand contacting the chain if your hand slips off the front handlebar.

SPosition of front and rear handlebars, de- signed with distance between handles and “in-line” with each other. The spread and “in-line” position of the hands provided by this design work together to give balance and resistance in controlling the pivot of the saw back toward the operator if kick- back occurs.

WARNING: DO NOT RELY UPON ANY OF THE DEVICES BUILT INTO YOUR SAW. YOU SHOULD USE THE SAW PROP- ERLY AND CAREFULLY TO AVOID KICK- BACK. Reduced--kickback guide bars and low--kickback saw chains reduce the chance and magnitude of kickback and are recom- mended. Your saw has a low kickback chain and bar as original equipment. Repairs on a chain brake should be made by an authorized servicing dealer. Take your unit to the place of purchase if purchased from a servicing dealer, or to the nearest authorized master service dealer.

STip contact in some cases may cause a light- ning fast reverse REACTION, kicking the

guide bar up and back toward the operator.

SPinching the saw chain along the top of the

guide bar may push the guide bar rapidly back toward the operator.

SEither of these reactions may cause you to lose control of the saw which could result in serious injury.Do not rely exclusively upon the safety devices built into your saw.

CHAIN BRAKE

SChain Brake, designed to stop the chain in the event of kickback.

WARNING: Your chain saw is equipped with a chain brake that is designed to stop the chain immediately if you get a kickback. The chain brake reduces the risk of accidents, but only you can prevent them.

DO NOT ASSUME THAT THE CHAIN BRAKE WILL PROTECT YOU IN THE EVENT OF A KICKBACK.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Français EnglishDeutsch EspañolIdentification of Symbols Identification What is WHAT?Plan Ahead Safety RulesOperate Your SAW Safely Maintain Your SAW in Good Working OrderReduce the Chance Kickback KickbackMaintain Control Refuel unitChain Brake Kickback Safety FeaturesAttaching the BAR & Chain If not AssemblyAttaching the Optional Bumper Spike Fueling Engine Chain Tension Including units with chain already installedFueling & Lubrication BAR and Chain Lubrication StartingImportant Points to Remember Starting a Warm EngineChain Brake Cutting MethodsImportant Points Tree Felling TechniquesNotch CUT and Felling the Tree Felling Large TreesCutting a Fallen Tree Inches in diameter or largerTypes of Cutting Used for Bucking Bucking Using a LOG or Support StandBucking Without a Support Limbing and Pruning Important PointsCarburetor Adjustment ServiceLimbing PruningChain Sharpening BAR MaintenanceIgnition Timing Spark PlugEmpty fuel tank and refill with Troubleshooting Table Cause RemedyLoad Adjustment Engine Relating to 2000/14/EC Declaration of ConformityTechnical Data Sheet

137, 142 specifications

The Husqvarna 137 and 142 are popular chainsaw models known for their reliability and performance, catering to both residential and light professional use. Bringing together a blend of innovative technologies and user-friendly features, these models have been designed to ensure that tasks such as tree pruning, firewood cutting, and light felling can be conducted efficiently and safely.

One of the standout features of both the Husqvarna 137 and 142 is their lightweight construction. Weighing in at approximately 4.5 kg, these chainsaws are easy to handle, particularly for users who may need to work for extended periods. This lightweight design significantly reduces fatigue, enabling operators to work longer without the weariness often associated with heavy machinery.

Powering these chainsaws is a robust 2.0 kW engine, which delivers an optimal balance of performance and efficiency. The engine has been engineered to provide a fast and consistent chain speed, allowing for clean and precise cuts. An efficient air filtration system contributes to the longevity of the engine, ensuring less frequent cleaning and maintenance. This feature is particularly advantageous for users who rely on their equipment for frequent tasks.

Both models come equipped with an automatic oil pump that ensures proper lubrication of the chain and bar during operation. This feature not only extends the life of the chainsaw but also enhances cutting efficiency. Additionally, the chain tensioning system is designed for easy adjustments, providing users with the ability to maintain the proper tension with minimal effort.

Safety is also a key consideration in the design of the Husqvarna 137 and 142. These models feature a chain brake that effectively stops the chain's movement in the event of kickback, protecting the operator from potential injury. Furthermore, the anti-vibration technology integrated into the handles helps to reduce vibrations felt by the user, contributing to a more comfortable and safer operating experience.

The ergonomic design is complemented by an intuitive layout, with controls that are easy to access and operate. The combination of performance, safety features, and user-centric design makes the Husqvarna 137 and 142 excellent choices for anyone needing a dependable chainsaw for various tasks. These models offer a powerful, efficient, and comfortable experience, making them an ideal investment for both hobbyists and occasional users alike.
Top Page Image Contents