Husqvarna 136, 141, 136LE, 141LE Troubleshooting Table Cause Remedy, Limited Warranty

Page 15

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect spark plug before performing all of the recommended remedies below except remedies that require operation of the unit.

 

TROUBLE

CAUSE

REMEDY

 

 

 

 

 

 

Engine will not

1. Ignition switch off.

1. Move ignition switch to ON.

 

start or will run

2. Engine flooded.

2. See “Difficult Starting” in

 

only a few

 

 

 

Operation Section.

 

seconds after

3. Fuel tank empty.

3. Fill tank with correct fuel mixture.

 

starting.

4. Spark plug not firing.

4. Install new spark plug.

 

 

5. Fuel not reaching

5. Check for dirty fuel filter; replace.

 

 

 

carburetor.

 

Check for kinked or split fuel line;

 

 

 

 

 

repair or replace.

 

 

 

 

 

 

 

Engine will

1.

Carburetor requires

1. See “Carburetor Adjustment” in the

 

not idle

 

adjustment.

 

Service and Adjustments Section.

 

properly.

2.

Crankshaft seals worn.

2. Contact an authorized service dealer.

 

Engine will not

1.

Air filter dirty.

1.

Clean or replace air filter.

 

accelerate,

2.

Spark plug fouled.

2.

Clean or replace plug and regap.

 

lacks power,

3.

Chain brake engaged.

3.

Disengage chain brake.

 

or dies under

4.

Carburetor requires

4.

Contact an authorized service dealer.

 

a load.

 

adjustment.

 

 

 

 

 

 

 

 

Engine

1. Too much oil mixed with

1. Empty fuel tank and refill with

 

smokes

 

gasoline.

 

correct fuel mixture.

 

excessively.

 

 

 

 

 

Chain moves

1. Idle speed requires

1. See “Carburetor Adjustment” in the

 

at idle speed.

 

adjustment.

 

Service and Adjustments Section.

 

 

2. Clutch requires repair.

2.

Contact an authorized service dealer.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SECTION 1: LIMITED WARRANTY

Husqvarna Forest & Garden Company (”Husqvarna”) warrants Husqvarna product

to the original purchaser to be free from defects in material and workmanship from the date of purchase for the “Warranty Period” of the prod- ucts as set forth below:

Lifetime Warranty: All tiller tines against breakage, trimmer shafts, ignition coils and modules on hand held product.

3 Year Warranty: Spindles (on Zero Turn Riders and Commercial Walk--Behinds)

2 Year COMMERCIAL Warranty: Husq- varna Commercial Turf Equipment -- zero turn riders, wide area walks, and ground en- gaging commercial equipment.

2 Year NON-COMMERCIAL Warranty: Au-

tomatic mower, riding lawn mowers, yard and garden tractors, walk behind mowers, tillers, chain saws, trimmers, brushcutters, clearing saws, snow blowers, hand held blowers, back- pack blowers, hedge trimmers, electrical prod- ucts and power--assist collection systems for non--commercial, non--professional, non--insti- tutional or non--income producing use, except as herein stated.

Emission control system components neces- sary to comply with CARB--TIER II and EPA regulations, except for those components which are part of engine systems manufac- tured by third party engine manufacturers for which the purchaser has received a separate

warranty with product information supplied at time of purchase.

1 Year Warranty: Power cutters, stump grinder, pole pruners and pole saws for non-- commercial, non--professional, non--institu- tional or non--income producing use. All trim- mers, brushcutters, clearing saws, hovering trimmers, stick edgers, backpack blowers, hand held blowers, hedge trimmers, and power--assist collection systems used for commercial, institutional, professional, or in- come producing purposes or use.

Batteries have a one year prorated limited warranty with 100% replacement during the first 6 months.

90 Day Warranty: Automatic mower, chain saws, power cutters, stump grinders, pole saws, pole pruners, snow throwers, model se- ries 580 & 600 walk--behind mowers, and com- mercial turf equipment or any Husqvarna prod- uct used for commercial, institutional, professional, or income producing purposes or use except as otherwise provided herein.

Husqvarna Safety Apparel carries a 90--day warranty from the date of the customer’s origi- nal purchase for defects in material and work- manship. Normal wear, tear or abuse is not covered under warranty. Product must be re- turned to Charlotte with a warranty claim form. All care and maintenance instructions must be followed as stated by the manufacturer on the

15

Image 15
Contents 530163874 6/18/03 136Chain Brake Assembly Handle Fuel with Caution Plan AheadOperate Your SAW Safely Maintain Your SAW in Good Working OrderAvoid Pinch-Kickback KickbackReduce the Chance of Kickback Maintain ControlKickback Safety Features Chain Brake and CKA AngleElbow locked Thumb on underside of handlebar Safety Notice Exposure to Computed kickback angle CKA TableStandards Chain Tension Including units with chain already installed Attaching the BAR & Chain IfChecking the tension Guide Bar Chain Brake Nuts Adjusting the tensionFueling Engine BAR and Chain LubricationImportant points to remember Starting a Warm EngineChain Brake Tree Felling Techniques Braking function control Caution The chain brake must beInertia activating function control Important PointsUse a wedge to remove pinched saw Notch CUT and Felling the TreeCutting a Fallen Tree Types of Cutting Used for BuckingLimbing Bucking Using a LOG or SUP- Port StandBucking Without a Support Limbing and Pruning Important PointsAIR Filter Cleaning the air filterCarburetor Adjustments BAR MaintenanceStorage Chain SharpeningIgnition Timing Spark PlugYear NON-COMMERCIAL Warranty Au Troubleshooting Table Cause RemedyLimited Warranty Load Adjustment EngineExceptions and Limitations HUSQVARNA’S OB- Ligations Under the WarrantyItems not Covered by this Warranty Procedure to OB- Tain Warranty ConsiderationLigations The U. S. Environmental Maintenance Statement The ownerIntermediate 125 hours Extended 300 hours