Husqvarna 324LDX-Series, 324LX-Series Assembly, Fitting the loop handle, Fitting the trimmer head

Page 12

ASSEMBLY

Fitting the loop handle

•Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaft.

•Slide the spacer into the slot in the loop handle.

•Fit the nut, knob and screw. Do not overtighten.

•Now adjust the trimmer to give a comfortable working position. Tighten the bolt/knob.

Assembling and dismantling the two-piece shaft

(324LDx)

Assembly:

•Make sure the knob is loose.

•Align the cut-out in the lower part of the shaft with the coupling locking tab on the upper part of the shaft. Then lock the sections together.

•Tighten the knob.

Dismantling:

•Undo the knob (at least three turns).

•Push the knob towards the coupling.

•Carefully twist the lower half of the shaft to unlock it.

•Hold both parts of the shaft and pull the lower part of the shaft out of the coupling.

Fitting the trimmer head

WARNING! Never use a cutting attachment

!without an approved guard. See the chapter on Technical data. If an incorrect or faulty guard is fitted this can cause serious personal injury.

Fitting a trimmer guard and Superauto II 1" trimmer head

 

 

K

K

G

 

F

B

 

I

J

I

C

 

 

 

 

A

•Fit the correct trimmer guard (A) for use with the trimmer head. Hook the guard onto the fitting on the shaft and secure it with the bolt (L).

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•To fit the trimmer head, first separate the two halves (see diagram). Proceed as follows:

•Insert a finger into the centre hole of the cover (I) while grasping the cover with your other fingers. Using the index finger and thumb of your other hand, release the two catches (J) that engage in the cut-outs in the bottom half

(K). Pull apart the trimmer head, grasping the cover firmly.

•Place the cover (I) and the support flange (F) on the output shaft. Ensure that the drive discs guide locates correctly in the covers centre hole.

12 – English

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 324LX-series 324LDX-series KEY to Symbols SymbolsContents Safety Instructions Machine′s safety equipmentPersonal protective equipment Vibration damping system MufflerCutting equipment Locking nutNever use a machine that has a faulty muffler Cutting equipment Trimmer headGeneral safety precautions Fuel safetyStarting Transport and storageBasic safety rules Grass trimming using a trimmer head and plastic bladesGeneral working instructions Basic working techniquesCutting What is WHAT? What is what?Assembly Fitting the loop handleAssembling and dismantling the two-piece shaft Fitting the trimmer headFitting other guards and cutting attachments Fuel Handling FuelStarting and Stopping Check before startingStarting and stopping Cold engineStopping Maintenance CarburettorMuffler Cooling systemCleaning the air filter Two-piece shaftAir filter Oiling the air filterMaintenance schedule Daily maintenanceWeekly maintenance Monthly maintenanceTechnical Data Technical dataFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsSuper Auto Super Auto II Page S35 25 m ´z+H7o¶5p¨ Page 1140237-95 ´z+H7o¶5p¨ ´z+H7o¶5p¨

324LX-Series, 324LDX-Series specifications

The Husqvarna 324LDX-Series and 324LX-Series are two of the most innovative and efficient line of trimmers and brushcutters on the market, designed to cater to the needs of both professional landscapers and discerning homeowners. They offer a combination of power, versatility, and ease of use, making them essential tools for tackling a wide range of outdoor tasks.

At the heart of both series is a powerful, high-performance engine that ensures reliable operation and outstanding cutting speeds. The X-Torq engine technology reduces fuel consumption and emissions, making these trimmers more environmentally friendly while providing ample power for various cutting applications. This focus on efficiency doesn't sacrifice performance; users can achieve professional results with minimal effort.

One of the standout features of the 324LDX and 324LX models is their modular design. This allows for easy attachment of various implements and accessories, transforming a simple trimmer into a multi-tool. From hedge trimmers to pole saws and more, this adaptability enhances the versatility of the machines, allowing users to tackle different tasks without needing multiple tools. The quick-release couplings make switching attachments a breeze, maximizing productivity in any outdoor project.

Ergonomics play a vital role in the design of these series. Both the 324LDX and 324LX come equipped with adjustable handles that provide superior control and comfort during operation. The harnesses are designed for optimal weight distribution, allowing users to work longer without discomfort or fatigue. Additionally, the lightweight design of the machines ensures that they are easy to maneuver, even in tight spots or over uneven terrain.

Another significant aspect of the Husqvarna 324LDX-Series and 324LX-Series is their advanced cooling system, which prevents overheating and extends the life of the engine. The air filter is easy to access and clean, promoting maintenance simplicity and enhancing the longevity of the machine.

The 324LX-Series, in particular, offers a more robust design for professionals who require extra power and durability. The high-capacity fuel tank extends runtime, catering to larger jobs without constant refueling.

In summary, the Husqvarna 324LDX-Series and 324LX-Series stand out due to their powerful engines, versatile attachments, ergonomic designs, and advanced cooling systems. Whether for residential gardening or professional landscaping, these trimmers deliver reliability and performance for any outdoor challenge.
Top Page Image Contents