Husqvarna 324LDX-Series General safety precautions, Fuel safety, Starting, Transport and storage

Page 8

SAFETY INSTRUCTIONS

WARNING! Always stop the engine before

!doing any work on the cutting attachment. This continues to rotate even after the throttle has been released. Ensure that the cutting attachment has stopped completely and disconnect the HT lead from the spark plug before you start to work on it.

General safety precautions

IMPORTANT!

The machine is only designed for trimming grass.

The only accessories you can operate with this engine unit are the cutting attachments we recommend in the chapter on Technical data.

Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your co-ordination.

Never use the machine in extreme weather conditions such as severe cold, very hot and/or humid climates.

Never use a machine that has been modified in any way from its original specification.

Wear personal protective equipment. See instructions under the heading Personal protective equipment.

Never use a machine that is faulty. Carry out the checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance.

All covers and guards must be fitted before starting. Make sure the spark plug cap and HT lead are not damaged. Otherwise you could get an electric shock.

The machine operator must ensure that no people or animals come closer than 15 metres while working. When several operators are working in the same area the safety distance should be at least twice the tree height and no less than 15 metres.

WARNING! A faulty cutting attachment may

!increase the risk of accidents.

Starting

WARNING! When the engine is started with

!the choke in either the choke or start throttle positions the cutting attachment will start to rotate immediately.

•The complete clutch cover and shaft must be fitted before the machine is started, otherwise the clutch can come loose and cause personal injury.

•Never start the machine indoors. Exhaust fumes can be dangerous if inhaled.

8 – English

•Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment.

•Place the machine on the ground, ensure the cutting attachment is clear of twigs and stones. Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot). Then grip the starter handle with your right hand and pull the starter cord.

Never wrap the starter cord around your hand

Fuel safety

•Always use a fuel container with an anti-spill valve.

•Never refuel the machine while the engine is running. Always stop the engine and let it cool for a few minutes before refuelling.

•Always ensure there is adequate ventilation when handling fuel.

•Move the machine at least 3 m from the refuelling point before starting it.

•Never start the machine:

1If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

4Avoid all skin contact with fuel. Fuel is a skin irritant and may even cause skin changes.

Transport and storage

•Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked flames, for example, from electrical machinery, electric motors, electrical relays/switches or boilers.

•When storing and transporting fuel always use approved containers intended for this purpose.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents 324LX-series 324LDX-series KEY to Symbols SymbolsContents Personal protective equipment Safety InstructionsMachine′s safety equipment Vibration damping system MufflerCutting equipment Locking nutNever use a machine that has a faulty muffler Cutting equipment Trimmer headGeneral safety precautions Fuel safetyStarting Transport and storageBasic safety rules Grass trimming using a trimmer head and plastic bladesGeneral working instructions Basic working techniquesCutting What is WHAT? What is what?Assembly Fitting the loop handleAssembling and dismantling the two-piece shaft Fitting the trimmer headFitting other guards and cutting attachments Fuel Handling FuelStarting and Stopping Check before startingStarting and stopping Cold engineStopping Maintenance CarburettorMuffler Cooling systemCleaning the air filter Two-piece shaftAir filter Oiling the air filterMaintenance schedule Daily maintenanceWeekly maintenance Monthly maintenanceTechnical Data Technical dataFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsSuper Auto Super Auto II Page S35 25 m ´z+H7o¶5p¨ Page 1140237-95 ´z+H7o¶5p¨ ´z+H7o¶5p¨

324LX-Series, 324LDX-Series specifications

The Husqvarna 324LDX-Series and 324LX-Series are two of the most innovative and efficient line of trimmers and brushcutters on the market, designed to cater to the needs of both professional landscapers and discerning homeowners. They offer a combination of power, versatility, and ease of use, making them essential tools for tackling a wide range of outdoor tasks.

At the heart of both series is a powerful, high-performance engine that ensures reliable operation and outstanding cutting speeds. The X-Torq engine technology reduces fuel consumption and emissions, making these trimmers more environmentally friendly while providing ample power for various cutting applications. This focus on efficiency doesn't sacrifice performance; users can achieve professional results with minimal effort.

One of the standout features of the 324LDX and 324LX models is their modular design. This allows for easy attachment of various implements and accessories, transforming a simple trimmer into a multi-tool. From hedge trimmers to pole saws and more, this adaptability enhances the versatility of the machines, allowing users to tackle different tasks without needing multiple tools. The quick-release couplings make switching attachments a breeze, maximizing productivity in any outdoor project.

Ergonomics play a vital role in the design of these series. Both the 324LDX and 324LX come equipped with adjustable handles that provide superior control and comfort during operation. The harnesses are designed for optimal weight distribution, allowing users to work longer without discomfort or fatigue. Additionally, the lightweight design of the machines ensures that they are easy to maneuver, even in tight spots or over uneven terrain.

Another significant aspect of the Husqvarna 324LDX-Series and 324LX-Series is their advanced cooling system, which prevents overheating and extends the life of the engine. The air filter is easy to access and clean, promoting maintenance simplicity and enhancing the longevity of the machine.

The 324LX-Series, in particular, offers a more robust design for professionals who require extra power and durability. The high-capacity fuel tank extends runtime, catering to larger jobs without constant refueling.

In summary, the Husqvarna 324LDX-Series and 324LX-Series stand out due to their powerful engines, versatile attachments, ergonomic designs, and advanced cooling systems. Whether for residential gardening or professional landscaping, these trimmers deliver reliability and performance for any outdoor challenge.
Top Page Image Contents