Husqvarna 324LX-Series, 324LDX-Series manual Cutting equipment, Trimmer head

Page 7

SAFETY INSTRUCTIONS

•Regularly check that the muffler is securely attached to the machine.

•The muffler on your machine is equipped with a spark arrestor mesh, this should be cleaned regularly. A blocked mesh will cause the engine to overheat and may lead to serious damage.

Never use a muffler with a defective spark arrestor mesh.

Cutting equipment

•Only use cutting attachments with the guards we recommend! See the chapter on Technical data.

•Check the cutting attachment for damage or cracks. A damaged cutting attachment should always be replaced.

Locking nut

•When fitting, tighten the nut in the opposite direction to the direction of rotation of the cutting attachment. To remove it, undo the nut in the same direction as the cutting attachment rotates. (CAUTION! The nut has a left-hand thread.)

•Tighten the nut using the socket spanner. 35-50 Nm (3.5- 5 kpm).

CAUTION! The nylon lining inside the locking nut must not be so worn that you can turn it by hand. The lining should offer a resistance of at least 1.5 Nm. The nut should be replaced after it has been put on approx. 10 times.

WARNING! Never use a machine with faulty

!safety equipment. The machine’s safety equipment must be checked and maintained as described in this section. If your machine fails any of these checks contact your service agent to get it repaired.

Cutting equipment

IMPORTANT!

This section describes how to choose and maintain your cutting equipment in order to:

Reduce the risk of blade thrust.

Obtain maximum cutting performance.

Extend the life of cutting equipment.

Only use cutting attachments with the guards we recommend! See the chapter on Technical data.

Refer to the instructions for the cutting attachment to check the correct way to load the cord and the correct cord diameter.

Trimmer head

•Only use the recommended trimmer heads and trimmer cords. These have been tested by the manufacturer to suit a particular engine size. This is especially important when a fully automatic trimmer head is used. Only use the recommended cutting attachment. See the chapter on Technical data.

•Smaller machines generally require small trimmer heads and vice versa. This is because when clearing using a cord the engine must throw out the cord radially from the trimmer head and overcome the resistance of the grass being cleared.

•The length of the cord is also important. A longer cord requires greater engine power than a shorter cord of the same diameter.

•Make sure that the cutter on the trimmer guard is intact. This is used to cut the cord to the correct length.

•To increase the life of the cord it can be soaked in water for a couple of days. This will make the line tougher so that it lasts longer.

IMPORTANT! Always ensure the trimmer cord is wound tightly and evenly around the drum, otherwise the machine will generate harmful vibration.

English – 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 324LX-series 324LDX-series Symbols KEY to SymbolsContents Machine′s safety equipment Safety InstructionsPersonal protective equipment Locking nut Vibration damping systemMuffler Cutting equipmentNever use a machine that has a faulty muffler Trimmer head Cutting equipmentTransport and storage General safety precautionsFuel safety StartingBasic working techniques Basic safety rulesGrass trimming using a trimmer head and plastic blades General working instructionsCutting What is what? What is WHAT?Fitting the trimmer head AssemblyFitting the loop handle Assembling and dismantling the two-piece shaftFitting other guards and cutting attachments Fuel Fuel HandlingCold engine Starting and StoppingCheck before starting Starting and stoppingStopping Cooling system MaintenanceCarburettor MufflerOiling the air filter Cleaning the air filterTwo-piece shaft Air filterMonthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceTechnical data Technical DataYour Warranty Rights and Obligations Federal Emission Control Warranty StatementSuper Auto Super Auto II Page S35 25 m ´z+H7o¶5p¨ Page 1140237-95 ´z+H7o¶5p¨ ´z+H7o¶5p¨

324LX-Series, 324LDX-Series specifications

The Husqvarna 324LDX-Series and 324LX-Series are two of the most innovative and efficient line of trimmers and brushcutters on the market, designed to cater to the needs of both professional landscapers and discerning homeowners. They offer a combination of power, versatility, and ease of use, making them essential tools for tackling a wide range of outdoor tasks.

At the heart of both series is a powerful, high-performance engine that ensures reliable operation and outstanding cutting speeds. The X-Torq engine technology reduces fuel consumption and emissions, making these trimmers more environmentally friendly while providing ample power for various cutting applications. This focus on efficiency doesn't sacrifice performance; users can achieve professional results with minimal effort.

One of the standout features of the 324LDX and 324LX models is their modular design. This allows for easy attachment of various implements and accessories, transforming a simple trimmer into a multi-tool. From hedge trimmers to pole saws and more, this adaptability enhances the versatility of the machines, allowing users to tackle different tasks without needing multiple tools. The quick-release couplings make switching attachments a breeze, maximizing productivity in any outdoor project.

Ergonomics play a vital role in the design of these series. Both the 324LDX and 324LX come equipped with adjustable handles that provide superior control and comfort during operation. The harnesses are designed for optimal weight distribution, allowing users to work longer without discomfort or fatigue. Additionally, the lightweight design of the machines ensures that they are easy to maneuver, even in tight spots or over uneven terrain.

Another significant aspect of the Husqvarna 324LDX-Series and 324LX-Series is their advanced cooling system, which prevents overheating and extends the life of the engine. The air filter is easy to access and clean, promoting maintenance simplicity and enhancing the longevity of the machine.

The 324LX-Series, in particular, offers a more robust design for professionals who require extra power and durability. The high-capacity fuel tank extends runtime, catering to larger jobs without constant refueling.

In summary, the Husqvarna 324LDX-Series and 324LX-Series stand out due to their powerful engines, versatile attachments, ergonomic designs, and advanced cooling systems. Whether for residential gardening or professional landscaping, these trimmers deliver reliability and performance for any outdoor challenge.
Top Page Image Contents