Safety instructions while working

SAFETY INSTRUCTIONS

•Always ensure you have a safe and stable working position

•Always use both hands to hold the machine. Hold the machine at the side of your body.

•Use your right hand to control the throttle setting.

•Make sure that your hands and feet do not come near the cutting attachment when the engine is running.

•When the engine is switched off, keep your hands and feet away from the cutting attachment until it has stopped completely.

•Watch out for stumps of branches that can be thrown out during cutting.

•Always lay the machine on the ground when you are not using it.

•Check the working area for foreign objects such as electricity cables, insects and animals, etc, or other objects that could damage the cutting attachment, such as metal items.

•If any foreign object is hit or if vibrations occur stop the machine immediately. Disconnect the HT lead from the spark plug. Check that the machine is not damaged.

Repair any damage.

•If anything gets caught up in the cutting equipment while you are working, switch off the engine and let it stop completely and remove the ignition lead before cleaning the cutting equipment.

•This machine is not electrically insulated. If the machine touches or comes close to high-voltage power lines it could lead to death or serious bodily injury.

Safety instructions after completing work

•The transport guard should always be ﬁtted to the cutting attachment when the machine is not in use.

•Make sure the cutting attachment has stopped before cleaning, carrying out repairs or an inspection. Disconnect the HT lead from the spark plug.

•Always wear heavy-duty gloves when repairing the cutting attachment. This is extremely sharp and can easily cause cuts.

•Store the machine out of reach of children.

•Use only original spare parts for repairs.

Basic working techniques

•Hold the machine as close to your body as possible to get the best balance.

•Make sure that the tip does not touch the ground.

•Do not rush the work, but work steadily until all the branches have been cut back cleanly.

•Always slow the engine to idle speed after each working operation. Long periods at full throttle without any load on the engine can lead to serious engine damage.

•Always work at full throttle.

•Let the engine drop back to idle speed between each cut. Long periods at full throttle can cause serious damage to the centrifugal clutch.

WARNING! Never stand directly underneath

!a branch that is being cut. This could lead to serious or even fatal personal injury.

Observe great care when working close to overhead power lines. Falling branches can result in short-circuiting.

WARNING! Observe the applicable safety

!regulations for work in the vicinity of overhead power lines.

English – 13

323P4, 325P5 specifications

The Husqvarna 323P4 and 325P5 are innovative, high-performance pole saws designed for both professional and residential users, providing exceptional cutting efficiency and versatility in managing tree branches and high-reaching foliage. These models represent the latest advancements in outdoor power tools, combining robust engines with ergonomic designs for maximum user comfort and performance.

The Husqvarna 323P4 features a 25.4cc, 2-stroke engine, delivering the power and reliability needed for more demanding cutting tasks while maintaining a lightweight design. This pole saw has a reach of up to 12 feet, making it ideal for trimming and pruning high branches without the need for ladders. Equipped with a 10-inch cutting bar, the 323P4 ensures clean and precise cuts, allowing users to tackle branches with ease.

On the other hand, the Husqvarna 325P5 ups the ante with a more powerful 27.6cc engine, offering enhanced cutting performance and efficiency. With a slightly longer reach, this model supports a telescopic pole that can extend up to 15 feet, introducing more flexibility for users needing to access higher heights. Like the 323P4, the 325P5 features a 10-inch cutting bar, ensuring consistent cutting performance on even thicker branches.

Both models are equipped with advanced technologies to enhance user experience. Husqvarna’s X-Torq engine technology reduces harmful emissions and improves fuel efficiency, allowing users to work longer without frequent refueling. Additionally, the automatic oiler ensures continuous lubrication of the cutting bar and chain, reducing friction and extending the life of the tool.

Ergonomics play a crucial role in the design of these pole saws. The lightweight construction, combined with a balanced design, minimizes user fatigue, particularly during extended use. The adjustable telescoping pole enables users to customize the saw's length, ensuring comfort while maintaining control during operation.

Moreover, both models feature a built-in safety switch and a comfortable grip to enhance user safety and comfort. These features ensure greater control while minimizing the risk of accidental starts.

In summary, the Husqvarna 323P4 and 325P5 pole saws exemplify cutting-edge engineering, delivering powerful performance and ease of use to tackle various trimming tasks. With user-friendly features and advanced technologies, these tools are ideal for anyone seeking an efficient and reliable solution for overhead cutting projects.