Speciﬁcation of bar and saw chain, Chain

SAFETY INSTRUCTIONS

•Keep cutting equipment well lubricated and properly maintained! A poorly lubricated chain is more likely to break and lead to increased wear on the bar, chain and drive sprocket.

WARNING! Never use a machine with faulty

!safety equipment. The machine’s safety equipment must be checked and maintained as described in this section. If your machine fails any of these checks contact your service agent to get it repaired.

WARNING! Always stop the engine before

!doing any work on the cutting attachment. This continues to rotate even after the throttle has been released. Ensure that the cutting attachment has stopped completely and disconnect the HT lead from the spark plug before you start to work on it.

Speciﬁcation of bar and saw chain

When the cutting attachment supplied with your machine has to be replaced, because it is worn out or damaged, you must only ﬁt the types of bar and saw chain recommended by us.

Bar

•Length (inches/cm)

•Number of teeth on bar tip sprocket (T). Small number = small tip radius = low risk of kickback.

•Chain pitch (inches). The spacing between the drive links of the chain must match the spacing of the teeth on the bar tip sprocket and drive sprocket.

•Number of drive links. The number of drive links is determined by the length of the bar, the chain pitch and the number of teeth on the bar tip sprocket.

•Bar groove width (inches/mm).The groove in the bar must match the width of the chain drive links.

•Saw chain oil hole and hole for chain tensioner pin.

Chain

•Saw chain pitch (inches). (The distance between three drive links, divided by two.)

•Drive link width (mm/inches)

•Number of drive links.

Level of kickback reduction. The only thing that describes the level of kickback reduction offered by a saw chain is its model number.

Sharpening your chain and adjusting raker clearance

WARNING! The risk of kickback is increased

!with a badly sharpened chain!

General information on sharpening cutting teeth

•Never use a blunt chain. When the chain is blunt you have to exert more pressure to force the bar through the wood and the cuttings will be very small. If the chain is very blunt it will not produce any cuttings at all. Wood powder would be the only result.

•A sharp chain eats its way through the wood and produces long, thick cuttings.

English – 7

323P4, 325P5 specifications

The Husqvarna 323P4 and 325P5 are innovative, high-performance pole saws designed for both professional and residential users, providing exceptional cutting efficiency and versatility in managing tree branches and high-reaching foliage. These models represent the latest advancements in outdoor power tools, combining robust engines with ergonomic designs for maximum user comfort and performance.

The Husqvarna 323P4 features a 25.4cc, 2-stroke engine, delivering the power and reliability needed for more demanding cutting tasks while maintaining a lightweight design. This pole saw has a reach of up to 12 feet, making it ideal for trimming and pruning high branches without the need for ladders. Equipped with a 10-inch cutting bar, the 323P4 ensures clean and precise cuts, allowing users to tackle branches with ease.

On the other hand, the Husqvarna 325P5 ups the ante with a more powerful 27.6cc engine, offering enhanced cutting performance and efficiency. With a slightly longer reach, this model supports a telescopic pole that can extend up to 15 feet, introducing more flexibility for users needing to access higher heights. Like the 323P4, the 325P5 features a 10-inch cutting bar, ensuring consistent cutting performance on even thicker branches.

Both models are equipped with advanced technologies to enhance user experience. Husqvarna’s X-Torq engine technology reduces harmful emissions and improves fuel efficiency, allowing users to work longer without frequent refueling. Additionally, the automatic oiler ensures continuous lubrication of the cutting bar and chain, reducing friction and extending the life of the tool.

Ergonomics play a crucial role in the design of these pole saws. The lightweight construction, combined with a balanced design, minimizes user fatigue, particularly during extended use. The adjustable telescoping pole enables users to customize the saw's length, ensuring comfort while maintaining control during operation.

Moreover, both models feature a built-in safety switch and a comfortable grip to enhance user safety and comfort. These features ensure greater control while minimizing the risk of accidental starts.

In summary, the Husqvarna 323P4 and 325P5 pole saws exemplify cutting-edge engineering, delivering powerful performance and ease of use to tackle various trimming tasks. With user-friendly features and advanced technologies, these tools are ideal for anyone seeking an efficient and reliable solution for overhead cutting projects.