Husqvarna 323P4, 325P5 manual KEY to Symbols

Page 2

KEY TO SYMBOLS

Symbols

WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

•A protective helmet where there is a risk of

falling objects

• Approved hearing protection

•Protective goggles or a visor

This machine is not electrically insulated. If the machine touches or comes close to high-voltage power lines it could lead to

death or serious bodily injury. Electricity can jump from one point to another by arcing. The higher the voltage, the greater

the distance electricity can jump. Electricity can also travel through branches and other objects, especially if

they are wet. Always keep a distance of at

least 10 m between the machine and high-voltage power lines and/or any objects that are touching them. If have to work within this safe distance you should always contact the relevant power company to make sure the power is switched off before you start work.

This machine has a long reach. Make sure that no people or animals come closer than 15 m when the machine is running.

Always wear approved protective gloves.

Wear sturdy, non-slip boots.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be worn.

Filling with chain oil and adjusting oil flow

2 – English

Page 1 Page 3
Image 2
Page 1 Page 3
Contents 323P4 325P5X-series KEY to Symbols SymbolsContents Personal protective equipment Safety InstructionsMachine′s safety equipment Muffler Cutting equipment Chain Sharpening your chain and adjusting raker clearanceSpecification of bar and saw chain BarSharpening cutting teeth Tensioning the chain General advice on setting raker clearanceSetting the raker clearance Lubricating cutting equipment Checking wear on cutting equipment ChainChain drive sprocket General safety precautionsStarting Vibration damping systemSafety instructions regarding the surroundings Safety instructions for using a pruning sawFuel safety Transport and storageBasic working techniques Safety instructions while workingSafety instructions after completing work Without having the cutting attachment in full view What is WHAT? What is what?Fitting the cutting head AssemblyAdjusting the harness Fitting the bar and chainDismantling AssemblyAssembling and dismantling the two-piece shaft Fuelling Fuel HandlingFuel Starting and stopping Starting and StoppingCheck before starting Maintenance CarburettorMuffler Fine adjustment of the idle speed TCorrectly adjusted carburettor High speed jet HSpark plug Cleaning the air filterCooling system Air filterMaintenance schedule Bevel gearTechnical Data Technical dataTechnical Data Federal Emission Control Warranty Statement Your Warranty Rights and ObligationsPage Page Page ´z+H0o¶5M¨ Page 1140167-95

323P4, 325P5 specifications

The Husqvarna 323P4 and 325P5 are innovative, high-performance pole saws designed for both professional and residential users, providing exceptional cutting efficiency and versatility in managing tree branches and high-reaching foliage. These models represent the latest advancements in outdoor power tools, combining robust engines with ergonomic designs for maximum user comfort and performance.

The Husqvarna 323P4 features a 25.4cc, 2-stroke engine, delivering the power and reliability needed for more demanding cutting tasks while maintaining a lightweight design. This pole saw has a reach of up to 12 feet, making it ideal for trimming and pruning high branches without the need for ladders. Equipped with a 10-inch cutting bar, the 323P4 ensures clean and precise cuts, allowing users to tackle branches with ease.

On the other hand, the Husqvarna 325P5 ups the ante with a more powerful 27.6cc engine, offering enhanced cutting performance and efficiency. With a slightly longer reach, this model supports a telescopic pole that can extend up to 15 feet, introducing more flexibility for users needing to access higher heights. Like the 323P4, the 325P5 features a 10-inch cutting bar, ensuring consistent cutting performance on even thicker branches.

Both models are equipped with advanced technologies to enhance user experience. Husqvarna’s X-Torq engine technology reduces harmful emissions and improves fuel efficiency, allowing users to work longer without frequent refueling. Additionally, the automatic oiler ensures continuous lubrication of the cutting bar and chain, reducing friction and extending the life of the tool.

Ergonomics play a crucial role in the design of these pole saws. The lightweight construction, combined with a balanced design, minimizes user fatigue, particularly during extended use. The adjustable telescoping pole enables users to customize the saw's length, ensuring comfort while maintaining control during operation.

Moreover, both models feature a built-in safety switch and a comfortable grip to enhance user safety and comfort. These features ensure greater control while minimizing the risk of accidental starts.

In summary, the Husqvarna 323P4 and 325P5 pole saws exemplify cutting-edge engineering, delivering powerful performance and ease of use to tackle various trimming tasks. With user-friendly features and advanced technologies, these tools are ideal for anyone seeking an efficient and reliable solution for overhead cutting projects.
Top Page Image Contents