Connect the supplied speaker system by matching the colors of the terminals to those of the cords. The speaker wires and connectors are
FRONT LEFT
SPEAKER
BLACK
RED
REAR LEFT
SPEAKER
GREY
BLACK
FRONT RIGHT
SPEAKER
R L
DVD IN
AUX IN
OUTPUT |
|
| CENTER |
LEFT |
|
| SPEAKER |
4 | RED |
| |
FRONT |
|
| |
RIGHT | TERMINALS | BLACK | BLUE |
|
| ||
| SPEAKER |
| BLACK |
RIGHT |
|
| |
LEFT |
|
|
|
REAR |
|
|
|
+
REAR RIGHT
SPEAKER
BLACK | GREY |
T 1.25AL/250V
NOTE:
•Connect the Front Left speaker to the Front Left terminals (red + black).
•Connect the Front Right speaker to the Front Right terminals (red + black).
•Connect the Center speaker to the Center speaker terminals (blue + black).
•Connect the Rear Left speaker to the Rear Left terminals(grey + black).
•Connect the Rear Right speaker to the Rear Right terminals (grey + black).
IMPORTANT:
1.Before making connections, make sure the power is off.
2.Be sure you are using the correct satellite speaker in each location, front, rear and center.
3.Each speaker must be connected to 1 colored terminal AND 1 black terminal.
4.Match the colors of the wires to the colors of the terminals.
Tips for connecting the speaker wires
Unwind and stretch out the speaker wires attached with each speakers, then push and hold down the set terminal tab on the back of the main set to insert each wire. Make sure the wire is fully inserted, but the insulation is not covering the inserted part of the speaker wires.
SET TERMINALS | SET TERMINALS | SET TERMINALS |
PUSH AND HOLD THE TAB OF TERMINAL.
WHILE HOLDING THE TAB OF THE TERMINAL, STICK THE EXPOSED PART OF THE WIRE INTO THE HOLE OF THE TERMINAL.
COLORED WIRE TO COLORED
TERMINAL, BLACK WIRE TO
BLACK TERMINAL.
REMOVE YOUR FINGER FROM THE TERMINAL TO LOCK THE WIRE INSIDE THE TERMINAL.
GO ON TO THE NEXT WIRE & REPEAT ABOVE. MAKE SURE POWER IS OFF WHEN DOING THE ABOVE.
NOTE: Be sure to match the speaker wire to the appropriate terminal on the back of the main set: (+) to (+) (color), and
7 |
|