Battery Installation | Remote Control Operating Range |
1.Gently push the door and slide to open the BATTERY DOOR.
Point the REMOTE CONTROL unit within 20 feet from the remote control sensor and facing the front of the HOME THEATER SYSTEM.
2.Insert 2 size “AAA” alkaline batteries (included) into the battery compartment according to the “ + ” and “ – ” markings inside the battery compartment.
+
_
Remember: The spring touches the “ – ” side of each battery.
3. Replace the battery compartment door.
Tips on Battery Use
•Reversing polarities will damage the batteries and possibly your REMOTE. Be sure to follow polarity “ + ” and “ – ” as indicated.
•Do not mix different types of batteries together (Alkaline,
•When not in use for an extended period of time (over 30 days), remove the batteries to prevent possible acid leakage or corrosion resulting in possible damage to your REMOTE CONTROL.
•When the batteries have become discharged, they must be disposed of in a safe manner that complies with all applicable laws.
REMOTE CONTROL RANGE
SENSOR SOURCE VOLUME
ON
STANDBY
30o 30o
Distance within 20 feet
Remember to point the REMOTE CONTROL in the direction of the HOME THEATER’s sensor, not the TV set or the DVD player.
Point the REMOTE CONTROL at the Home Theater’s Front
Make sure there is a clear path between the REMOTE CONTROL and the HOME THEATER SYSTEM so that the signal is not blocked.
•Installation of batteries should only be done by an adult (for safety).
WARNING:
The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Tips on REMOTE CONTROL Operation
•The REMOTE control’ s operating distance may vary according to the brightness of the room.
•Do not point bright lights at the REMOTE CONTROL SENSOR (like laser pointers).
•Do not place objects between the REMOTE CONTROL unit and the REMOTE SENSOR.
•Do not use this REMOTE CONTROL while simultaneously using the remote control unit of any other equipment, the signals may mix.
•Sometimes your TV’s remote may cause an LED to flash, you can ignore this.
6 |
|