Husqvarna YTH2146XP owner manual Tractor, Brake Operation, Tires, Battery, Blade Care

Page 15

MAINTENANCE

TRACTOR

Always observe safety rules when performing any main- tenance.

BRAKE OPERATION

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced. (See “TO CHECK BRAKE” in the Service and Adjustments section of this manual).

TIRES

•Maintain proper air pressure in all tires (See PSI on tires).

•Keep tires free of gasoline, oil, or insect control chemi- cals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM AND REVERSE OP- ERATION SYSTEM (ROS)

Be sure operator presence and reverse operation systems are working properly. If your tractor does not function as described, repair the problem immediately.

•The engine should not start unless the brake pedal is fully depressed, and the attachment clutch control is in the disengaged position.

CHECK OPERATOR PRESENCE SYSTEM

•When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

•When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

•The attachment clutch should never operate unless the operator is in the seat.

ROS "ON" Position

Engine "ON" Position

(Normal Operating)

 

02828

CHECK REVERSE OPERATION (ROS) SYSTEM

•When the engine is running with the ignition switch in the engine "ON" position and the attachment clutch engaged, any attempt by the operator to shift into reverse should shut off the engine.

•When the engine is running with the ignition switch in the ROS "ON" position and the attachment clutch en- gaged, any attempt by the operator to shift into reverse should NOT shut off the engine.

CAUTION: Useonlyareplacementblade approved by the manufacturer of your tractor. Using a blade not approved by the manufacturer of your tractor is hazardous, could damage your tractor and void your warranty.

BLADE REMOVAL (See Fig. 13)

•Raise mower to highest position to allow access to blades.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

•Remove blade bolt by turning counterclockwise.

•Install new blade with stamped "GRASS SIDE" facing the ground.

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

•Install and tighten blade bolt securely (45-55 Ft. Lbs. torque).

IMPORTANT: Special blade bolt is heat treated.

 

STAR

 

 

 

BLADE

CENTER

 

 

 

HOLE

 

 

 

 

 

 

 

BLADE BOLT

02

54

4

 

(SPECIAL)

 

 

MANDREL

 

 

 

 

 

 

 

ASSEMBLY

FIG. 13

BATTERY

Your tractor has a battery charging system which is sufficient for normal use. However, periodic charging of the battery with an automotive charger will extend its life.

•Keep battery and terminals clean.

•Keep battery bolts tight.

•Keep small vent holes open.

•Recharge at 6-10 amperes for 1 hour.

NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

TO CLEAN BATTERY AND TERMINALS

Corrosion and dirt on the battery and terminals can cause the battery to “leak” power.

•

Remove terminal guard.

•

Disconnect BLACK battery cable first then RED bat-

 

tery cable and remove battery from tractor.

• Rinse the battery with plain water and dry.

• Clean terminals and battery cable ends with wire brush

 

until bright.

• Coat terminals with grease or petroleum jelly.

BLADE CARE

For best results mower blades must be sharp. Replace worn, bent or damaged blades.

15

• Reinstall battery (See “REPLACING BATTERY" in

the SERVICE AND ADJUSTMENTS section of this

manual).

Page 14 Page 16
Image 15
Page 14 Page 16
Contents YTH2146XP II. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIV. Towing ServiceGeneral Service III. ChildrenTable of Contents Unpack Carton AssemblyUnassembled Parts To Remove Tractor from CartonCheck Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Reverse Operation System ROS on Position Know Your TractorStopping HOW to USE Your TractorTo Operate Mower To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig System CharacteristicsCheck Engine OIL Level Service REMINDER/HOUR MeterBefore Starting the Engine To Operate on HillsTo Start Engine See Fig Purge TransmissionAutomatic Transmission Warm UP Mowing Tips Schedule MaintenanceMaintenance General RecommendationsTires BatteryTractor Brake OperationEngine IN-LINE Fuel Filter See Fig CleaningService and Adjustments To Install Mower See FigTo Remove Mower See Fig Service and Adjustments To Level Mower Belt Removal Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTo Check Brake To Remove CABLES, Reverse Order To Start Engine with a Weak Battery See FigReplacing Battery See Fig To Attach Jumper CablesTo Replace Headlight Bulb To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorEngine OIL StorageOther Fuel SystemProblem Cause Correction Troubleshooting PointsEngine dies when Tractor Model NO. YTH2146XP96043002900, Product no 43 SchematicDecals Wheels and TiresKEY Part Description Electrical KEY Part NO. NO. Description Chassis KEY Part Description Drive KEY Part NO. NO. Description Steering Assembly Engine Spark Arrester KITSeat Assembly Mower Lift Mower Deck Tractor Model NO. YTH2146XP96043002900, Product no 43 Service Notes Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationWarranty Statement

YTH2146XP specifications

The Husqvarna YTH2146XP is a powerful and efficient riding lawn mower designed for homeowners with medium to large-sized yards. It combines advanced technology with user-friendly features, making it a popular choice for those seeking a balance of performance and comfort.

One of the standout features of the YTH2146XP is its robust 46-inch cutting deck. This wide deck allows for efficient mowing, helping users cover more ground in less time. The cutting height can be easily adjusted using a convenient lever, providing versatility for various grass types and mowing preferences. The mower is equipped with a high-performance 21.5 HP Briggs & Stratton engine, delivering reliable power and durability. With this engine, the YTH2146XP can tackle tough mowing conditions while ensuring a smooth ride.

The mower also incorporates Hydrostatic transmission, which offers seamless speed and direction control. This technology allows the operator to easily adjust the speed without shifting gears, resulting in a more enjoyable mowing experience. The ergonomically designed steering wheel and seat provide added comfort, helping to reduce fatigue during longer mowing sessions.

For added convenience, the YTH2146XP features a choke control located on the dashboard, making it easier to start the engine in various weather conditions. An easy-access fuel tank allows for quick refueling, while the integrated cup holder ensures that users can stay hydrated while working outdoors.

The mower's tight turning radius enhances maneuverability, enabling users to navigate around obstacles like trees and flower beds with ease. Furthermore, the YTH2146XP is compatible with various attachments, such as baggers and snow blades, extending its utility throughout the year.

Safety is also a key consideration in the design of the YTH2146XP. It comes equipped with an automatic blade brake system that stops the blades upon releasing the seat switch, minimizing the risk of accidents. Additionally, the rugged construction ensures longevity and reliability, making this mower a long-term investment.

In summary, the Husqvarna YTH2146XP stands out for its combination of power, advanced features, and user-friendly design. With its efficient cutting deck, dependable engine, and a range of comfort features, it is an excellent choice for homeowners who value performance and ease of use in their lawn maintenance tasks. Its versatility allows for year-round use, making it a practical addition to any outdoor toolkit.
Top Page Image Contents