Husqvarna YTH2146XP owner manual To Level Mower

Page 20

SERVICE AND ADJUSTMENTS

TO LEVEL MOWER

Make sure tires are properly inflated to the PSI shown on tires. If tires are over or under inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly.

VISUAL SIDE-TO-SIDE ADJUSTMENT (See Fig. 22)

With all tires properly inflated and if your lawn appears unevenly cut, determine which side of mower is cutting lower.

With a 3/4" or adjustable wrench, turn lift link adjust- ment nut (A) to the left to lower LH side of mower, or, to the right to raise LH side of mower.

 

A

Turn nut right

Turn nut left

to raise mower

to lower mower

02948

 

FIG. 22

NOTE: Each full turn of adjustment nut will change mower height about 3/16".

Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if necessary, until you are satisfied with the results.

PRECISION SIDE-TO-SIDE ADJUSTMENT (See Fig. 23)

With all tires properly inflated, park tractor on level ground or driveway.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

Raise mower to its highest position.

At both sides of mower, position blade at side and measure the distance (A) from bottom edge of blade to the ground. The distance should be the same on both sides.

 

02966

A

A

FIG. 23

If adjustment is necessary, see step in Visual Adjust- ment instructions above.

Recheck measurements, adjust if necessary until both sides are equal.

FRONT-TO-BACK ADJUSTMENT (See Figs. 24 and 25) IMPORTANT: Deck must be level side-to-side.

To obtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

Raise mower to highest position.

Position any blade so the tip is pointing straight forward. Measure distance (B) to the ground at front and rear tip of the blade.

If front tip of blade is not 1/8" to 1/2" lower than the rear

02548

BB

FIG. 24

tip, go to the front of tractor.

With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B.

With a 3/4" or adjustable wrench, turn front link adjust- ment nut (B) clockwise (ltighten) to raise the front of mower, or, counterclockwise (loosen) to lower the front mower.

B

A

Tighten adjust nut

Loosen adjust

B to raise mower

nut B to lower

02950

mower

 

Loosen jam nut A first

FIG. 25

NOTE: Each full turn of the adjustment nut will change mower height about 1/8".

Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip.

Hold adjustment nut in position with wrench and tighten jam nut securely against adjustment nut.

20

Image 20
Contents YTH2146XP Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationService General ServiceIII. Children IV. TowingTable of Contents Assembly Unassembled PartsTo Remove Tractor from Carton Unpack CartonCheck Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor Reverse Operation System ROS on PositionHOW to USE Your Tractor StoppingTo Adjust Mower Cutting Height See Fig To Adjust Gauge Wheels See FigSystem Characteristics To Operate MowerService REMINDER/HOUR Meter Before Starting the EngineTo Operate on Hills Check Engine OIL LevelAutomatic Transmission Warm UP To Start Engine See FigPurge Transmission Mowing Tips Maintenance MaintenanceGeneral Recommendations ScheduleBattery TractorBrake Operation TiresEngine Cleaning IN-LINE Fuel Filter See FigTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig Service and Adjustments To Level Mower Belt Installation To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig Belt RemovalTo Check Brake Front Wheel TOE-IN/CAMBERTo Remove Wheel for Repairs See Fig To Start Engine with a Weak Battery See Fig Replacing Battery See FigTo Attach Jumper Cables To Remove CABLES, Reverse OrderTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace Headlight BulbStorage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionEngine dies when Schematic Tractor Model NO. YTH2146XP96043002900, Product no 43KEY Part Description DecalsWheels and Tires Electrical KEY Part NO. NO. Description Chassis KEY Part Description Drive KEY Part NO. NO. Description Steering Assembly Spark Arrester KIT EngineSeat Assembly Mower Lift Mower Deck Tractor Model NO. YTH2146XP96043002900, Product no 43 Service Notes Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXWarranty Statement

YTH2146XP specifications

The Husqvarna YTH2146XP is a powerful and efficient riding lawn mower designed for homeowners with medium to large-sized yards. It combines advanced technology with user-friendly features, making it a popular choice for those seeking a balance of performance and comfort.

One of the standout features of the YTH2146XP is its robust 46-inch cutting deck. This wide deck allows for efficient mowing, helping users cover more ground in less time. The cutting height can be easily adjusted using a convenient lever, providing versatility for various grass types and mowing preferences. The mower is equipped with a high-performance 21.5 HP Briggs & Stratton engine, delivering reliable power and durability. With this engine, the YTH2146XP can tackle tough mowing conditions while ensuring a smooth ride.

The mower also incorporates Hydrostatic transmission, which offers seamless speed and direction control. This technology allows the operator to easily adjust the speed without shifting gears, resulting in a more enjoyable mowing experience. The ergonomically designed steering wheel and seat provide added comfort, helping to reduce fatigue during longer mowing sessions.

For added convenience, the YTH2146XP features a choke control located on the dashboard, making it easier to start the engine in various weather conditions. An easy-access fuel tank allows for quick refueling, while the integrated cup holder ensures that users can stay hydrated while working outdoors.

The mower's tight turning radius enhances maneuverability, enabling users to navigate around obstacles like trees and flower beds with ease. Furthermore, the YTH2146XP is compatible with various attachments, such as baggers and snow blades, extending its utility throughout the year.

Safety is also a key consideration in the design of the YTH2146XP. It comes equipped with an automatic blade brake system that stops the blades upon releasing the seat switch, minimizing the risk of accidents. Additionally, the rugged construction ensures longevity and reliability, making this mower a long-term investment.

In summary, the Husqvarna YTH2146XP stands out for its combination of power, advanced features, and user-friendly design. With its efficient cutting deck, dependable engine, and a range of comfort features, it is an excellent choice for homeowners who value performance and ease of use in their lawn maintenance tasks. Its versatility allows for year-round use, making it a practical addition to any outdoor toolkit.