Husqvarna YTH2146XP owner manual Storage, Other, Fuel System, Engine OIL, Cylinders

Page 25

STORAGE

Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more.

WARNING: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

Clean entire tractor (See “CLEANING” in the Mainte- nance section of this manual).

Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

Lubricate as shown in the Maintenance section of this manual.

Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

Fully charge the battery for storage.

After a period of time in storage, battery may require recharging.

To help prevent corrosion and power leakage during long periods of storage, battery cables should be dis- connected and battery cleaned thoroughly (see “TO CLEAN BATTERY AND TERMINALS” in the Mainte- nance section of this manual).

After cleaning, leave cables disconnected and place cables where they cannot come in contact with battery terminals.

If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

Empty the fuel tank by starting the engine and let it run until the fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in mini- mizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean en- gine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER(S)

Remove spark plug(s).

Pour one ounce of oil through spark plug hole(s) into cylinder(s).

Turn ignition key to “START” position for a few seconds to distribute oil.

Replace with new spark plug(s).

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your tractor indoors and cover it to give protection from dust and dirt.

Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your tractor to rust.

IMPORTANT: NEVER COVER TRACTOR WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

25

Image 25
Contents YTH2146XP Safe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationGeneral Service ServiceIII. Children IV. TowingTable of Contents Unassembled Parts AssemblyTo Remove Tractor from Carton Unpack CartonCheck Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Reverse Operation System ROS on Position Know Your TractorStopping HOW to USE Your TractorTo Adjust Gauge Wheels See Fig To Adjust Mower Cutting Height See FigSystem Characteristics To Operate MowerBefore Starting the Engine Service REMINDER/HOUR MeterTo Operate on Hills Check Engine OIL LevelPurge Transmission To Start Engine See FigAutomatic Transmission Warm UP Mowing Tips Maintenance MaintenanceGeneral Recommendations ScheduleTractor BatteryBrake Operation TiresEngine IN-LINE Fuel Filter See Fig CleaningTo Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig Service and Adjustments To Level Mower To Replace Mower Blade Drive Belt See Fig Belt InstallationTo Replace Motion Drive Belt See Fig Belt RemovalTo Remove Wheel for Repairs See Fig Front Wheel TOE-IN/CAMBERTo Check Brake Replacing Battery See Fig To Start Engine with a Weak Battery See FigTo Attach Jumper Cables To Remove CABLES, Reverse OrderTo Adjust Choke Control To Adjust Throttle Control CableTo Adjust Carburetor To Replace Headlight BulbOther StorageFuel System Engine OILProblem Cause Correction Troubleshooting PointsEngine dies when Tractor Model NO. YTH2146XP96043002900, Product no 43 SchematicWheels and Tires DecalsKEY Part Description Electrical KEY Part NO. NO. Description Chassis KEY Part Description Drive KEY Part NO. NO. Description Steering Assembly Engine Spark Arrester KITSeat Assembly Mower Lift Mower Deck Tractor Model NO. YTH2146XP96043002900, Product no 43 Service Notes Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationWarranty Statement

YTH2146XP specifications

The Husqvarna YTH2146XP is a powerful and efficient riding lawn mower designed for homeowners with medium to large-sized yards. It combines advanced technology with user-friendly features, making it a popular choice for those seeking a balance of performance and comfort.

One of the standout features of the YTH2146XP is its robust 46-inch cutting deck. This wide deck allows for efficient mowing, helping users cover more ground in less time. The cutting height can be easily adjusted using a convenient lever, providing versatility for various grass types and mowing preferences. The mower is equipped with a high-performance 21.5 HP Briggs & Stratton engine, delivering reliable power and durability. With this engine, the YTH2146XP can tackle tough mowing conditions while ensuring a smooth ride.

The mower also incorporates Hydrostatic transmission, which offers seamless speed and direction control. This technology allows the operator to easily adjust the speed without shifting gears, resulting in a more enjoyable mowing experience. The ergonomically designed steering wheel and seat provide added comfort, helping to reduce fatigue during longer mowing sessions.

For added convenience, the YTH2146XP features a choke control located on the dashboard, making it easier to start the engine in various weather conditions. An easy-access fuel tank allows for quick refueling, while the integrated cup holder ensures that users can stay hydrated while working outdoors.

The mower's tight turning radius enhances maneuverability, enabling users to navigate around obstacles like trees and flower beds with ease. Furthermore, the YTH2146XP is compatible with various attachments, such as baggers and snow blades, extending its utility throughout the year.

Safety is also a key consideration in the design of the YTH2146XP. It comes equipped with an automatic blade brake system that stops the blades upon releasing the seat switch, minimizing the risk of accidents. Additionally, the rugged construction ensures longevity and reliability, making this mower a long-term investment.

In summary, the Husqvarna YTH2146XP stands out for its combination of power, advanced features, and user-friendly design. With its efficient cutting deck, dependable engine, and a range of comfort features, it is an excellent choice for homeowners who value performance and ease of use in their lawn maintenance tasks. Its versatility allows for year-round use, making it a practical addition to any outdoor toolkit.