SAFETY INSTRUCTIONS
GENERAL SAFETY PRECAUTIONS
1Chain saws are designed solely for cutting wood. The only cutting equipment that can be used with this chain saw are the combinations of bars and chains recommended in the ”Technical data” section.
2Never use a chain saw if you are tired, if you have drunk alcohol, or if you are taking medication that affects your vision, your judgement or your co- ordination.
WARNING!
Running an engine in a confined or badly ventilated area can result in death due to asphyxiation or carbon monoxide poisoning.
3Always wear suitable safety clothing. See the section on ”Personal protective equipment”.
4Never use a chain saw that has been modified in any way from its original specification.
5a Never use a chain saw that is faulty. Carry out the regular checks, maintenance and service routines described in this manual. Some maintenance and service measures must be carried out by trained specialists. See the section on ”Maintenance”.
bBefore use
1Check that the chain brake works correctly and is not damaged. See the instructions under the heading Checking the chain brake.
2Check that the rear right hand guard is not
damaged.
3 Check that the throttle lock works correctly and is not damaged.
4Check that the start and stop switch works correctly and is not damaged.
5Check that all handles are free of oil.
6Check that the anti vibration system works and is not damaged.
7Check that the muffler is securely attached and not damaged.
8Check that all parts of the chain saw are tightened correctly and that they are not damaged or missing.
9Check that the chain catcher is in place and not damaged.
6STARTING
Long term inhalation of the engine's exhaust fumes, chain oil mist and dust from sawdust can represent a health risk.
Never start a chain saw unless the bar, chain and all covers are fitted correctly.
The chain brake must be engaged when the chain saw is started. See the instructions under the heading Start. Never air drop start the chain saw. This method is extremely dangerous, as it is easy to lose control of the chain saw. See the instructions under the heading Start.
•Never start a chain saw
unless the bar, chain and clutch cover are fitted correctly. (See section on ”Assembly”).
• Never start a chain saw indoors. Exhaust fumes can be dangerous.
• Before starting the saw make sure there are no people or animals nearby who might be put at risk.
• Place the saw on the ground and hold the rear handle down with your right foot. Grasp the front handle firmly using your left hand. Make sure the chain saw is steady and the chain is not touching the ground. Then grasp the starter handle with your right hand and pull the starter cord. Never twist the starter cord around your hand.
7FUEL SAFETY
(Refuelling, fuel mixture, storage.)
WARNING!
The catalytic converter muffler gets very hot during and after use. This also applies during idling. Be aware of the fire hazard, especially when handling the saw near flammable substances or vapours.
Fuel and fuel vapour are highly inflammable. Take care when handling fuel and chain oil. Keep away from naked flames and do not breathe in fuel vapour.
18 – English