About the remote control, Inserting the batteries

Cautions on handling

ENGLISH

About the remote control

Getting

•Before turning the power switch on

Check once again that all connections are correct and that there are no problems with the connection cables.

•Power is supplied to some of the circuitry even when the unit is set to the standby mode. When leaving home for long periods of time, be sure to unplug the power cord from the power outlet.

•About condensation

If there is a major difference in temperature between the inside of the unit and the surroundings, condensation may form on parts inside the unit, causing the unit to fail to operate properly.

If this happens, let the unit sit for an hour or two with the power off and wait until there is little difference in temperature before using the unit.

•Cautions on using mobile phones

Using a mobile phone near this unit may result in noise. If that occurs, move the mobile phone away from the unit when it is in use.

•Moving the unit

Turn off the power and unplug the power cord from the power outlet.

Next, disconnect the cables connected to other system units before moving the unit.

Inserting the batteries

q Remove the rear cover of the remote control.

w Set two R03/AAA batteries in the battery compartment in the indicated direction.

e Put the rear cover back on.

NOTE

•Replace the batteries with new ones if the unit does not operate even when the remote control is operated close to the unit.

•The supplied batteries are only for verifying operation.

•Insert the batteries in the proper direction, following the “q” and “w” marks in the battery compartment.

•To prevent damage or leakage of battery ﬂuid:

•Do not use a new battery with an old one.

•Do not use two different types of batteries.

•Do not attempt to charge dry batteries.

•Do not short-circuit, disassemble, heat or dispose of batteries in a ﬁre.

•Do not keep the battery in a place exposed to direct sunlight or in places with extremely high temperatures, such as near a heater.

•If the battery ﬂuid leaks, carefully wipe the ﬂuid off the inside of the battery compartment and insert new batteries.

•Remove the batteries from the remote control if it will not be used for a long time.

•Used batteries in accordance with local regulations on battery disposal.

Operating range of the remote control

operate the remote control while pointing it at the remote sensor.

Approx. 16.4 ft / 5 m

30°

NOTE

The unit may function improperly or the remote control may not operate if the remote control sensor is exposed to direct sunlight, or strong artiﬁcial light from a ﬂuorescent or infrared light.

started Basic connections Basic operation Advanced connections Advanced operation Troubleshooting Speciﬁcations Explanation terms Index

PM5004 specifications

The Marantz PM5004 is an integrated amplifier that embodies the brand's commitment to delivering high-quality audio performance in a stylish and user-friendly package. This amplifier is designed with both audiophiles and casual listeners in mind, providing an exceptional listening experience across a range of sources.

One of the standout features of the PM5004 is its robust power output. With a rated power of 40 watts per channel into 8 ohms, it is capable of driving a variety of loudspeakers with ease. This makes it suitable for a wide range of listening environments, from small rooms to larger spaces. The amplifier's ability to maintain clarity and detail at higher volumes is a testament to its engineering prowess.

The PM5004 utilizes a discrete current feedback amplifier circuit, which is designed to enhance the sound quality by minimizing distortion and preserving the integrity of the audio signal. This technology ensures that the amplifier can handle dynamic peaks without compromising sound fidelity. As a result, music playback is smooth, rich, and engaging, allowing listeners to fully immerse themselves in their favorite tracks.

In terms of connectivity, the PM5004 is equipped with several inputs, including phono, line-level, and auxiliary options. This versatility allows users to connect a wide range of audio sources, from turntables to CD players and streaming devices. The dedicated phono input is particularly noteworthy, as it is tailored for use with vinyl records, ensuring that the unique qualities of analog sound are preserved.

The design of the PM5004 is both elegant and functional. It features a classic Marantz aesthetic marked by a brushed aluminum front panel and a simple, intuitive layout. The large volume knob and source selector make operation straightforward, while the overall build quality reflects the brand's dedication to durability and style.

Additionally, the PM5004 incorporates various protection circuits to safeguard both the amplifier and connected speakers from potential damage. This reliability is crucial for maintaining performance over time, ensuring that users can enjoy their audio equipment worry-free.

In conclusion, the Marantz PM5004 is an integrated amplifier that combines power, sophistication, and advanced audio technology. With its versatile connectivity options and high-quality sound reproduction, it stands out as an excellent choice for anyone looking to enhance their listening experience. Whether you're a dedicated audiophile or simply enjoy good music, the PM5004 promises to deliver exceptional audio performance to satisfy diverse tastes.