Basic connections, Connecting the audio equipment

ENGLISH

Basic connections

NOTE

•Do not plug in the power cord until all connections have been completed.

•When making connections, also refer to the operating instructions of the other components.

•Be sure to connect the left and right channels properly (left with left, right with right).

•Do not bundle power cords with connection cables. Doing so can result in humming or noise.

•Do not turn up the volume without a turntable connected to the PHONO input terminals. Doing so will cause humming or noise.

Connecting the audio equipment

Cautions on playing SA(Super Audio) sources:

When regular speakers not compatible with SA sources (DVD Audio discs, Super Audio CDs and other sources, including treble components above the audible range), set the properties of the player (DVD Audio player, Super Audio CD player, etc.) for use with regular speakers (or ampliﬁers).

The speakers may be damaged if the volume is set too high when playing SA sources. For instructions on player settings, refer to the operating instructions included with the player.

Connecting the speakers

Connecting the speakers cables

NOTE

Preparations

Connecting cables

Select the cables according to the equipment being connected.

Audio cables

Analog connections (stereo)
(White)	L	L
(Red)	R	R

Stereo pin-plug cable

Speaker connections

Speaker cables

Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to the unit, and be sure to connect the channels and polarities correctly.

1 Peel off about 0.03 ft/10 mm of sheathing from the tip of the speaker cable, then either twist the core wire tightly or apply solder to it.

2 Turn the speaker terminal counterclockwise to loosen it.

3 Insert the speaker cable’s core wire to all the way into the speaker terminal.

4Turn the speaker terminal clockwise to tighten it.

When using a banana plug

Tighten the speaker terminal ﬁrmly before inserting the banana plug.

•Connect the speaker cables so they do not stick out of the speaker terminals. The protection circuit may be activated if the wires touch the rear panel or if the + and – sides touch each other (vpage 6 “Protection circuit”).

•Never touch the speaker terminals while the power supply is connected. Doing so could result in electric shock.

nProtection circuit

The protection circuit is be activated in the following situations:

•If the speaker cable wire touches the rear panel or screws or if the speaker cable wire touches the speaker cable’s + and – sides are touching

•If the surrounding temperature is extremely high

•If the inside of the ampliﬁer gets hot to extended use at a high output

If the protection circuit is activated, the speaker output is blocked and the power indicator ﬂashes in red. If this happens, unplug the power cord, then check the connections of the speaker cables and input cables. If the unit becomes very hot, wait for it to cool off and improve the ventilation around it. After doing this, plug the power cord back in.

If the protection circuit is activated even though there are no problems with the ventilation around the unit or in connections, the unit may be damaged. Turn off the power and then contact a Marantz service center.

PM5004 specifications

The Marantz PM5004 is an integrated amplifier that embodies the brand's commitment to delivering high-quality audio performance in a stylish and user-friendly package. This amplifier is designed with both audiophiles and casual listeners in mind, providing an exceptional listening experience across a range of sources.

One of the standout features of the PM5004 is its robust power output. With a rated power of 40 watts per channel into 8 ohms, it is capable of driving a variety of loudspeakers with ease. This makes it suitable for a wide range of listening environments, from small rooms to larger spaces. The amplifier's ability to maintain clarity and detail at higher volumes is a testament to its engineering prowess.

The PM5004 utilizes a discrete current feedback amplifier circuit, which is designed to enhance the sound quality by minimizing distortion and preserving the integrity of the audio signal. This technology ensures that the amplifier can handle dynamic peaks without compromising sound fidelity. As a result, music playback is smooth, rich, and engaging, allowing listeners to fully immerse themselves in their favorite tracks.

In terms of connectivity, the PM5004 is equipped with several inputs, including phono, line-level, and auxiliary options. This versatility allows users to connect a wide range of audio sources, from turntables to CD players and streaming devices. The dedicated phono input is particularly noteworthy, as it is tailored for use with vinyl records, ensuring that the unique qualities of analog sound are preserved.

The design of the PM5004 is both elegant and functional. It features a classic Marantz aesthetic marked by a brushed aluminum front panel and a simple, intuitive layout. The large volume knob and source selector make operation straightforward, while the overall build quality reflects the brand's dedication to durability and style.

Additionally, the PM5004 incorporates various protection circuits to safeguard both the amplifier and connected speakers from potential damage. This reliability is crucial for maintaining performance over time, ensuring that users can enjoy their audio equipment worry-free.

In conclusion, the Marantz PM5004 is an integrated amplifier that combines power, sophistication, and advanced audio technology. With its versatile connectivity options and high-quality sound reproduction, it stands out as an excellent choice for anyone looking to enhance their listening experience. Whether you're a dedicated audiophile or simply enjoy good music, the PM5004 promises to deliver exceptional audio performance to satisfy diverse tastes.