Husqvarna 965881201, 965881401, 965881301, 965881101, 965921501, RZ5424 Safe Handling of Gasoline

Page 13

SAFETY

WARNING!

The engine must not be started when the driver’s floor plate or any protective plate for the mower deck’s drive belt is removed.

Safe Handling of Gasoline

To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive.

•Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

•Use only approved gasoline container.

•Never remove gas cap or add fuel with the engine running. Allow engine to cool at least two (2) minutes before refueling.

•Never fuel the machine indoors.

•Never store the machine or fuel container where there is an open flame, spark, or pilot light such as on a water heater or other appliance.

•Before you begin refueling, minimize the risk of static electricity by touching a metal surface.

•Never fill containers inside a vehicle or on a truck or trailer bed with plastic liner. Always place containers on the ground away from the vehicle when filling.

•Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle.

•Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

•If fuel is spilled on clothing, change clothing immediately.

•Never overfill fuel tank. Replace gas cap and tighten securely.

•Do not start the engine near spilled fuel.

•Never use gasoline as a cleaning agent.

•If leaks arise in fuel system, engine must not be started until problem has been resolved.

•Check the fuel level before each use and leave space for the fuel to expand, as the heat from the engine and the sun may otherwise cause the fuel to expand and overflow.

8011-516

Never fill the fuel tank indoors

WARNING!

The engine and the exhaust system become very hot during operation.

There is risk for burns if touched.

Allow engine and exhaust system to cool at least two (2) minutes before refueling.

Husqvarna-13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operator Manual Page Contents English-4 Introduction Manufacturing Number Good ServiceSymbols and decals Moving sharp blades under cover Safety Instructions SafetyGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Control Locations ControlsSteering Control Levers Parking Brake Blade SwitchThrottle Control Choke Control Ignition SwitchFuses Fuel Tank Fuel Shut Off Valve Cutting Height AdjusterAlways raise the deck to the highest position for transport Hour Meter Seat Adjustment LeverTracking Knob Steering TrainingStarting the Engine Before StartingPlace controls in neutral position Press in and turn the ignition key to the start position Jumper Cables Weak BatteryTo remove cables, reverse order Running Operating On Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Schedule MaintenanceHusqvarna-35 Replacing battery BatteryIgnition System Safety SystemThrottle Cable Engine Cooling Air IntakeChoke Cable Kohler Engine 20 HP Air FilterKohler Engine 24 HP Servicing PrecleanerServicing Paper Element Briggs & Stratton Engine 19 HP Remove precleaner Briggs & Stratton Engine 22 HP Fuel Pump Air Filter Fuel FilterTire Pressures Belts Deck belt installationDeck Belt Cutting Blades Blade replacementLeveling deck Adjusting the Mower DeckAnti-scalp rollers Use protective glasses when cleaning and washing CleaningCaster Wheels HardwareGeneral LubricationCables LubricationFront Wheel Mount Front Wheel BearingsEngine Oil Deck Outer SpindleEngine Oil Filter Changing Engine Oil TransmissionTroubleshooting Troubleshooting Storage ServiceWinter Storage Schematics RZ4219 RZ4620 Engine Technical DataTransmission RZ4219 RZ4620 Frame DimensionELS RZ5424 RZ5422 EngineRZ5424 RZ5422 Frame RZ4619 Engine RZ4619 Frame Torque Specifications AccessoriesStandard Hardware Metric Standard HardwareCE requirements USA requirementsLimited Warranty WarrantyDelivery Service Service JournalAction Date, mtr reading, stamp, sign Change engine oil After the First 5-8 HoursHour Service Perform the 25-hour service Service Journal Husqvarna-73 At Least Once Each Year Page 115 127127 IR 10/15/08
Related manuals
Manual 56 pages 39.01 Kb Manual 40 pages 17.63 Kb

115 127127 IR, RZ4219, RZ4620, RZ4619, RZ5422 specifications

Husqvarna has long been a name synonymous with high-quality outdoor power equipment, and their line of riding mowers is no exception. Among their impressive offerings are models like the RZ4619, RZ4219F, and RZ5424, each designed to deliver exceptional performance and unmatched durability for residential homeowners and landscape professionals alike.

The Husqvarna RZ4619 is a robust zero-turn mower that combines speed with maneuverability. It features a powerful 19 HP Kohler engine that enables efficient mowing on large properties. Its 46-inch cutting deck allows for a wide swath with each pass, while the zero-turn capability enables precise navigation around obstacles and tight corners, dramatically reducing mowing time. Its comfortable high-back seat and user-friendly controls ensure extended periods of use without discomfort.

The RZ4219F is another notable model in the lineup, featuring a similar engine performance with a compact design that makes it perfect for homeowners with smaller yards. This mower is ideal for achieving a clean cut with a 42-inch deck, making it agile enough to handle intricate landscaping. The RZ4219F also comes equipped with a durable steel frame and reinforced cutting deck, ensuring longevity even under rigorous conditions.

For those seeking a more advanced option, the Husqvarna RZ5424 offers several premium features. The model is powered by a reliable 24 HP engine, enabling it to tackle tough grass with ease. The 54-inch reinforced cutting deck consists of three blades, ensuring a finely manicured lawn. Additionally, the RZ5424 is equipped with an innovative air induction mowing technology that improves grass flow for an even cutting height.

A common thread throughout these models is Husqvarna's commitment to comfort and ease of use. Features like ergonomic seating, intuitive controls, and ample storage options make these mowers user-friendly. Furthermore, they incorporate easy-to-access service points to simplify maintenance routines.

The RZ family also utilizes state-of-the-art technologies, such as the exclusive ClearCut cutting system, designed to enhance overall cutting efficiency. This ensures that grass clippings are finely chopped and left behind for a natural fertilizer effect.

In summary, Husqvarna's RZ4619, RZ4219F, RZ5424, along with the relevant model numbers 965881301 and 966514801, demonstrate the company's commitment to quality, performance, and innovation. Whether tackling expansive lawns or intricate landscaping, these mowers provide users with the tools necessary for achieving the perfect cut, all while ensuring comfort and ease of operation. With their powerful engines and thoughtful engineering, choosing a Husqvarna model is an investment in durability and performance.
Top Page Image Contents