Husqvarna 965881301, 965881401, 965881201, 965881101, 965921501, RZ5424, RZ5422 Limited Warranty

Page 67

WARRANTY

All Husqvarna products can be registered online at www.usa.husqvarna.com quickly and easily regardless of their model year. Click the Support tab, click on the Online Product Registration link and fill out the electronic form and submit. Ask about Husqvarna’s extended service plan!

SECTION 1 - LIMITED WARRANTY

Husqvarna Professional Products, Inc (“Husqvarna”) warrants the original purchaser the Husqvarna branded product to which this warranty apply (the “Product”) that the Product shall be free from defects in material and workmanship from the date of purchase for the period of the applicable “Warranty Schedule” of the Product as set forth below. Additional limitations are described in Section 2 through 6, inclusive.

PRODUCT

CONSUMER

COMMERCIAL/PROFESSIONAL

RENTAL

 

WARRANTY SCHEDULE

WARRANTY SCHEDULE

WARRANTY SCHEDULE

Zero Turn Rider

3 Years or 600 Hours

1 Year or 600 Hours

90 Days

 

 

 

 

All consumer product use must have been limited to the owner’s residence. Warranted for noncommercial, nonprofessional, noninstitutional and nonincome producing use.

SECTION 2 - HUSQVARNA’S OBLIGATIONS UNDER THE WARRANTY

Husqvarna will repair or replace defective components without charge for parts or labor if a component fails because of a defect in material or workmanship during the warranty period.

SECTION 3 - ITEMS NOT COVERED BY THIS WARRANTY

The following items are not covered by this warranty:

(1)Normal customer maintenance items which become worn through normal regular use, including, but not limited to belts, blades, blade adapters, bulbs, clutches, clutch drums, filters (fuel line, fuel filters, air filters, oil filters), sprockets, guide bars, lubricants, rewind springs, spark plugs;

(2)Natural discoloration of material due to ultraviolet light;

(3)Engine and drive systems not manufactured by Husqvarna; these items are covered by the respective manufacturer’s warranty as provided in writing with the product information supplied at the time of purchase; all claims must be sent to the appropriate manufacturer.

(4)Lawn and garden attachments that are covered by a third party which gives a warranty, all claims for warranty should be sent to the manufacturer.

(5)Commercial or consumer mowing decks with sand abrasion damage.

(6)Emission Control System components necessary to comply with CARB-TIER II and EPA regulations which are manufactured by third party engine manufacturer.

SECTION 4 - EXCEPTIONS AND LIMITATIONS

This warranty shall be inapplicable to defects resulting from the following:

(1)Accident, abuse, misuse, negligence and neglect, including stale fuel, dirt, abrasives, moisture, rust, corrosion, or any adverse reaction due to incorrect storage or use habits;

(2)Failure to operate or maintain the unit in accordance with the Owner’s/Operator’s manual or instruction sheet furnished by Husqvarna;

(3)Alterations or modifications that change the intended use of the product or affects the product’s performance, operation, safety, or durability, or causes the product to fail to comply with any applicable laws; or:

(4)Additional damage to parts or components due to continued use occurring after any of the above.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. HUSQVARNA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THESE PRODUCTS EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THESE PRODUCTS IS LIMITED IN DURATION TO THE WARRANTY PERIOD AS DEFINED IN THE LIMITED WARRANTY STATEMENT. HUSQVARNA RESERVES THE RIGHT TO CHANGE OR IMPROVE THE DESIGN OF THE PRODUCT WITHOUT NOTICE, AND DOES NOT ASSUME OBLIGATION TO UPDATE PREVIOUSLY MANUFACTURED PRODUCTS.

Some states do not allow the exclusion of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary by state.

SECTION 5 - CUSTOMER RESPONSIBILITIES

The product must exhibit reasonable care, maintenance, operation, storage and general upkeep as written in the maintenance section of the Owner’s/ Operator’s manual. Should an operational problem or failure occur, the product should not be used. Failure caused by continued use is not covered by warranty. Product should be delivered, at owners expense, as is, to an authorized Husqvarna Servicing Retailer for evaluation. Proof of purchase, as explained in section 6, rests solely with the customer.

SECTION 6 - PROCEDURE TO OBTAIN WARRANTY CONSIDERATION

It is the Owner’s and Retailer’s responsibility to make certain that the Warranty Registration Card is properly filled out and mailed to Husqvarna. This card should be mailed within ten (10) days from the date of purchase in order to confirm the warranty and to facilitate post-sale service. Proof of purchase must be presented to the authorized Husqvarna retailer in order to obtain warranty service. This proof must include date purchased, model number, serial number, and complete name and address of the selling retailer. To obtain the benefit of this warranty, the product believed to be defective must be delivered to an authorized Husqvarna retailer in a timely manner, no later than thirty (30) days from date of the operational problem or failure. The product must be delivered at the owner’s expense. Downtime, pick-up and delivery charges are not covered by this warranty. An authorized Husqvarna retailer can be located by calling 1-800-HUSKY-62 or visiting www.husqvarna.com

Subject to change without notice.

Husqvarna-67

Image 67
Contents Operator Manual Page Contents English-4 Introduction Manufacturing Number Good ServiceSymbols and decals Moving sharp blades under cover Safety Instructions SafetyGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Control Locations ControlsSteering Control Levers Parking Brake Blade SwitchThrottle Control Choke Control Ignition SwitchFuses Fuel Tank Fuel Shut Off Valve Cutting Height AdjusterAlways raise the deck to the highest position for transport Hour Meter Seat Adjustment LeverTracking Knob Steering TrainingStarting the Engine Before StartingPlace controls in neutral position Press in and turn the ignition key to the start position Jumper Cables Weak BatteryTo remove cables, reverse order Running Operating On Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Schedule MaintenanceHusqvarna-35 Replacing battery BatteryIgnition System Safety SystemThrottle Cable Engine Cooling Air IntakeChoke Cable Kohler Engine 20 HP Air FilterKohler Engine 24 HP Servicing PrecleanerServicing Paper Element Briggs & Stratton Engine 19 HP Remove precleaner Briggs & Stratton Engine 22 HP Fuel Pump Air Filter Fuel FilterTire Pressures Belts Deck belt installationDeck Belt Cutting Blades Blade replacementLeveling deck Adjusting the Mower DeckAnti-scalp rollers Hardware CleaningUse protective glasses when cleaning and washing Caster WheelsGeneral LubricationFront Wheel Bearings LubricationCables Front Wheel MountEngine Oil Deck Outer SpindleEngine Oil Filter Changing Engine Oil TransmissionTroubleshooting Troubleshooting Storage ServiceWinter Storage Schematics RZ4219 RZ4620 Engine Technical DataTransmission RZ4219 RZ4620 Frame DimensionELS RZ5424 RZ5422 EngineRZ5424 RZ5422 Frame RZ4619 Engine RZ4619 Frame Metric Standard Hardware AccessoriesTorque Specifications Standard HardwareCE requirements USA requirementsLimited Warranty WarrantyDelivery Service Service JournalAction Date, mtr reading, stamp, sign Change engine oil After the First 5-8 HoursHour Service Perform the 25-hour service Service Journal Husqvarna-73 At Least Once Each Year Page 115 127127 IR 10/15/08
Related manuals
Manual 56 pages 39.01 Kb Manual 40 pages 17.63 Kb

115 127127 IR, RZ4219, RZ4620, RZ4619, RZ5422 specifications

Husqvarna has long been a name synonymous with high-quality outdoor power equipment, and their line of riding mowers is no exception. Among their impressive offerings are models like the RZ4619, RZ4219F, and RZ5424, each designed to deliver exceptional performance and unmatched durability for residential homeowners and landscape professionals alike.

The Husqvarna RZ4619 is a robust zero-turn mower that combines speed with maneuverability. It features a powerful 19 HP Kohler engine that enables efficient mowing on large properties. Its 46-inch cutting deck allows for a wide swath with each pass, while the zero-turn capability enables precise navigation around obstacles and tight corners, dramatically reducing mowing time. Its comfortable high-back seat and user-friendly controls ensure extended periods of use without discomfort.

The RZ4219F is another notable model in the lineup, featuring a similar engine performance with a compact design that makes it perfect for homeowners with smaller yards. This mower is ideal for achieving a clean cut with a 42-inch deck, making it agile enough to handle intricate landscaping. The RZ4219F also comes equipped with a durable steel frame and reinforced cutting deck, ensuring longevity even under rigorous conditions.

For those seeking a more advanced option, the Husqvarna RZ5424 offers several premium features. The model is powered by a reliable 24 HP engine, enabling it to tackle tough grass with ease. The 54-inch reinforced cutting deck consists of three blades, ensuring a finely manicured lawn. Additionally, the RZ5424 is equipped with an innovative air induction mowing technology that improves grass flow for an even cutting height.

A common thread throughout these models is Husqvarna's commitment to comfort and ease of use. Features like ergonomic seating, intuitive controls, and ample storage options make these mowers user-friendly. Furthermore, they incorporate easy-to-access service points to simplify maintenance routines.

The RZ family also utilizes state-of-the-art technologies, such as the exclusive ClearCut cutting system, designed to enhance overall cutting efficiency. This ensures that grass clippings are finely chopped and left behind for a natural fertilizer effect.

In summary, Husqvarna's RZ4619, RZ4219F, RZ5424, along with the relevant model numbers 965881301 and 966514801, demonstrate the company's commitment to quality, performance, and innovation. Whether tackling expansive lawns or intricate landscaping, these mowers provide users with the tools necessary for achieving the perfect cut, all while ensuring comfort and ease of operation. With their powerful engines and thoughtful engineering, choosing a Husqvarna model is an investment in durability and performance.