Husqvarna RZ4620 manual Lubrication, Cables, Front Wheel Mount, Front Wheel Bearings, Deck Spindle

Page 52

LUBRICATION

Cables

 

If possible, grease both ends of the cables and move

 

the controls to end stop positions when lubricating.

 

Refit the rubber covers on the cables after lubrication.

 

Cables with sheaths will bind if they are not lubricated

 

regularly. If a cable binds, it can disrupt operation.

 

If a cable binds, remove the cable and hang it

 

vertically. Lubricate it with light engine oil until the oil

 

begins to escape from the bottom.

 

Tip: Fill a small plastic bag with oil and tape it so that

 

it seals against the sheath and allow the cable to hang

 

vertically from the bag overnight. If you do not succeed

 

in lubricating the cable, it must be replaced.

 

Front Wheel Mount

 

Lubricate with a grease gun, one zerk for each wheel

 

mount, until the grease is forced out.

 

Use only good quality bearing grease.

 

Grease from well-known brand names (petrochemical

 

companies) usually maintains a good quality.

 

Front Wheel Bearings

 

Lubricate with a grease gun, one zerk for each set of

 

wheel bearings, until the grease is forced out.

 

Use only good quality bearing grease.

 

IMPORTANT INFORMATION

 

Use minimal lubrication and remove

 

excess lubricant so that is does not come

 

into contact with belts or belt pulley drive

Lubricating the front wheels

surfaces.

 

Deck Spindle

Lower the cutting deck completely.

If a grease gun without a rubber hose is used, the foot plate must be removed.

Lubricate with a grease gun, one zerk, 2-3 strokes. Use only good quality bearing grease.

Deck spindle

52-Husqvarna

8011-731

8011-732

Page 51 Page 53
Image 52
Page 51 Page 53
Contents Operator Manual Page Contents English-4 Introduction Good Service Manufacturing NumberSymbols and decals Moving sharp blades under cover Safety Instructions SafetyGeneral Operation Never take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Controls Control LocationsSteering Control Levers Parking Brake Blade SwitchThrottle Control Choke Control Ignition SwitchFuses Fuel Tank Fuel Shut Off Valve Cutting Height AdjusterAlways raise the deck to the highest position for transport Hour Meter Seat Adjustment LeverTracking Knob Training SteeringBefore Starting Starting the EnginePlace controls in neutral position Press in and turn the ignition key to the start position Jumper Cables Weak BatteryTo remove cables, reverse order Running Operating On Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Maintenance ScheduleHusqvarna-35 Battery Replacing batterySafety System Ignition SystemThrottle Cable Engine Cooling Air IntakeChoke Cable Air Filter Kohler Engine 20 HPKohler Engine 24 HP Servicing PrecleanerServicing Paper Element Briggs & Stratton Engine 19 HP Remove precleaner Briggs & Stratton Engine 22 HP Fuel Filter Fuel Pump Air FilterTire Pressures Belts Deck belt installationDeck Belt Blade replacement Cutting BladesAdjusting the Mower Deck Leveling deckAnti-scalp rollers Cleaning Use protective glasses when cleaning and washingCaster Wheels HardwareLubrication GeneralLubrication CablesFront Wheel Mount Front Wheel BearingsEngine Oil Deck Outer SpindleEngine Oil Filter Transmission Changing Engine OilTroubleshooting Troubleshooting Storage ServiceWinter Storage Schematics RZ4219 RZ4620 Engine Technical DataTransmission Dimension RZ4219 RZ4620 FrameRZ5424 RZ5422 Engine ELSRZ5424 RZ5422 Frame RZ4619 Engine RZ4619 Frame Accessories Torque SpecificationsStandard Hardware Metric Standard HardwareUSA requirements CE requirementsWarranty Limited WarrantyDelivery Service Service JournalAction Date, mtr reading, stamp, sign After the First 5-8 Hours Change engine oilHour Service Perform the 25-hour service Service Journal Husqvarna-73 At Least Once Each Year Page 115 127127 IR 10/15/08
Related manuals
Manual 56 pages 39.01 Kb Manual 40 pages 17.63 Kb

115 127127 IR, RZ4219, RZ4620, RZ4619, RZ5422 specifications

Husqvarna has long been a name synonymous with high-quality outdoor power equipment, and their line of riding mowers is no exception. Among their impressive offerings are models like the RZ4619, RZ4219F, and RZ5424, each designed to deliver exceptional performance and unmatched durability for residential homeowners and landscape professionals alike.

The Husqvarna RZ4619 is a robust zero-turn mower that combines speed with maneuverability. It features a powerful 19 HP Kohler engine that enables efficient mowing on large properties. Its 46-inch cutting deck allows for a wide swath with each pass, while the zero-turn capability enables precise navigation around obstacles and tight corners, dramatically reducing mowing time. Its comfortable high-back seat and user-friendly controls ensure extended periods of use without discomfort.

The RZ4219F is another notable model in the lineup, featuring a similar engine performance with a compact design that makes it perfect for homeowners with smaller yards. This mower is ideal for achieving a clean cut with a 42-inch deck, making it agile enough to handle intricate landscaping. The RZ4219F also comes equipped with a durable steel frame and reinforced cutting deck, ensuring longevity even under rigorous conditions.

For those seeking a more advanced option, the Husqvarna RZ5424 offers several premium features. The model is powered by a reliable 24 HP engine, enabling it to tackle tough grass with ease. The 54-inch reinforced cutting deck consists of three blades, ensuring a finely manicured lawn. Additionally, the RZ5424 is equipped with an innovative air induction mowing technology that improves grass flow for an even cutting height.

A common thread throughout these models is Husqvarna's commitment to comfort and ease of use. Features like ergonomic seating, intuitive controls, and ample storage options make these mowers user-friendly. Furthermore, they incorporate easy-to-access service points to simplify maintenance routines.

The RZ family also utilizes state-of-the-art technologies, such as the exclusive ClearCut cutting system, designed to enhance overall cutting efficiency. This ensures that grass clippings are finely chopped and left behind for a natural fertilizer effect.

In summary, Husqvarna's RZ4619, RZ4219F, RZ5424, along with the relevant model numbers 965881301 and 966514801, demonstrate the company's commitment to quality, performance, and innovation. Whether tackling expansive lawns or intricate landscaping, these mowers provide users with the tools necessary for achieving the perfect cut, all while ensuring comfort and ease of operation. With their powerful engines and thoughtful engineering, choosing a Husqvarna model is an investment in durability and performance.
Top Page Image Contents