CONTROLS
Blade Control Lever
To engage the mower blades, slowly lift the lever up and into the the lock notch.
WARNING!
No adjustments or maintenance to be carried out unless:
•the engine stopped
•the ignition key removed
•the parking brake activated
Bypass Linkages
When pushing or pulling the mower, be sure to engage the EZT Hydrogear bypass linkages. The EZT bypass linkages are located on the rear of the frame, below the rear engine guard.
See Moving Machine By Hand in the Operation section.
Mower deck blade control lever in the disengaged position
Set bypass linkages into slots on both sides
22