Service and Adjustments, Rear Deflector | Husqvarna 6521CM specification

SERVICE AND ADJUSTMENTS

CAUTION: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

1.Release control bar and stop engine.

2.Make sure the blade and all moving parts have completely stopped.

3.Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug.

LAWN MOWER

TO ADJUST CUTTING HEIGHT

See “TO ADJUST CUTTING HEIGHT” in the Operation section of this manual.

REAR DEFLECTOR

The rear deﬂ ector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator's mowing position. If the deﬂ ector becomes damaged, it should be replaced.

TO ADJUST HANDLE (See Figs. 14 thru 16)

The handle can be mounted in a high or low position. The mounting holes in the bottom of lower handle are off center for raising or lowering the handle.

1.Remove upper handle and all wire tie(s) securing cable(s) to lower handle.

2.Remove hairpin cotters from lower handle bracket mounting pin.

3.Squeeze lower handle in to remove it from mounting pins.

4.Turn lower handle over to raise or lower handle.

5.Squeeze lower handle in and position holes onto mounting pins on handle bracket.

6.Reassemble upper handle and all parts removed from lower handle.

SQUEEZE
TO ADJUST
LOWER HANDLE
MOUNTING PIN
HANDLE	HAIRPIN
BRACKET	COTTER

FIG. 14

MOWING	MOWING
POSITION	POSITION
HAIRPIN
COTTER	HANDLE
	HANDLE
MOUNTING	BRACKET
PIN
LOW POSITION	HIGH POSITION

FIG. 15

LOWER

HANDLE

ROTATE

FIG. 16

ENGINE

Maintenance, repair, or replacement of the emission con- trol devices and systems, which are being done at the customers expense, may be performed by any non-road engine repair establishment or individual. Warranty repairs must be performed by an authorized engine manufacturer's service outlet.

ENGINE SPEED

Your engine speed has been factory set. Do not attempt to increase engine speed or it may result in personal injury. If you believe that the engine is running too fast or too slow, take your lawn mower to an authorized service center for repair and adjustment.

CARBURETOR

Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your lawn mower to an authorized service center for repair and/or adjustment.

IMPORTANT:NEVERTAMPERWITHTHEENGINEGOVERNOR, WHICH IS FACTORY SET FOR PROPER ENGINE SPEED. OVERSPEEDING THE ENGINE ABOVE THE FACTORY HIGH SPEED SETTING CAN BE DANGEROUS. IF YOU THINK THE ENGINE-GOVERNED HIGH SPEED NEEDS ADJUSTING, CONTACT YOUR NEARESTAUTHORIZED SERVICE CENTER, WHICH HAS PROPER EQUIPMENT AND EXPERIENCE TO

12MAKE ANY NECESSARY ADJUSTMENTS.

6521CM specifications

The Husqvarna 6521CM is a cutting-edge walk-behind lawn mower that blends power, functionality, and ease of operation, making it a suitable choice for homeowners and professionals alike. Known for its robust construction and innovative features, this mower is designed to tackle various lawn care needs, ensuring a pristine finish every time.

One of the primary features of the Husqvarna 6521CM is its powerful Honda engine, which delivers reliable performance and efficiency. This engine provides ample horsepower to handle tall grass and tough terrains, ensuring that mowing takes less time and effort. The self-propelled capabilities of the mower allow users to navigate hilly or uneven landscapes with ease, significantly reducing operator fatigue during longer mowing sessions.

The Husqvarna 6521CM is equipped with a practical 21-inch cutting deck, which strikes an ideal balance between maneuverability and cutting efficiency. The cutting deck is made of durable materials, ensuring resilience against wear and tear over time. Additionally, the mower features a 3-in-1 cutting system that allows for mulching, bagging, and side discharge, giving users the flexibility to choose their preferred grass handling option according to their lawn care needs.

Another notable technology in the Husqvarna 6521CM is its easy-starting mechanism, which eliminates the hassle often associated with traditional pull-start engines. This feature ensures that users can quickly get to work without the frustration of struggling to start the mower. The adjustable cutting height feature further enhances user convenience, offering multiple positions to suit various grass types and lengths, thus enabling precise control over the mowing height.

The ergonomic handle design of the Husqvarna 6521CM contributes to overall user comfort. The handle is adjustable, allowing for personalization based on the user’s height and preference, and the soft grip makes extended use more enjoyable. Additionally, the folding handle design facilitates easy storage, making it a space-saving option for homeowners with limited garage space.

Overall, the Husqvarna 6521CM stands out with its combination of a powerful engine, versatile cutting options, user-friendly features, and sturdy construction. This lawn mower not only enhances mowing efficiency but also allows users to achieve a beautiful lawn with minimal effort. Whether for routine lawn maintenance or tackling challenging patches, the Husqvarna 6521CM proves to be a dependable ally in lawn care.