!3Display
Indicators with an encircled number light up when the corresponding button is pressed.
L
dB – 30 20 10 8 3 | 0 3 +6 |
R
SYNC REV
REC
HIGH DUB
PLAY NORM DUB PLAY
aPeak Level Meter
bDirection & Pause Indicators
cMulti Counter
dSYNC REV Indicator
eMode Indicators
fDubbing Indicators
FRANÇAIS ENGLISH
a b d c e f e
!4PITCH CONTROL Knob
Used to vary the pitch (key of music) during playback of a cassette. (Only the pitch of Deck A can be varied.)
Turn the PITCH CONTROL clockwise to heighten the pitch by increasing the tape transport speed.
Turn it counterclockwise to lower the pitch by decreasing the tape transport speed.
cb
!5TIMER Switch (TIMER playback/TIMER recording)
The select switch for use in timer playback or timer recording using an audio timer.
Set this switch to the OFF position when timer playback or timer recording is not required.
ESPAÑOL
CASSETTE TAPES
Handling Precautions
Tape Slack
Before putting a tape into the deck, take up any slack with a pencil or your finger tip. This precaution prevents the tape from becoming entangled around the capstan or pinch roller.
Storage Precautions
Do not store cassette tapes in a place where they will be subject to:
Extremely high temperature or excessive moisture Excessive dust
Direct sunlight
Magnetic fields (near TV sets or speakers)
To eliminate tape slack, store your cassettes in cassette cases with hub stops
Accidental Erasure Prevention
All cassettes have erasure prevention tabs for each side. To protect valuable recordings from accidental or inadvertent erasure, remove the tab for the appropriate side with a screwdriver or another tool.
To record on a tape whose erasure prevention tabs have been removed, cover the tab holes with adhesive tape.
AUTOMATIC TAPE SELECTION
This Stereo Cassette Deck contains an automatic tape selector which automatically selects the optimum bias and equalization for the tape in use. This is accomplished by detection of the tape type detections holes in the cassette housing.
Erasure prevention tab for side A
Erasure prevention tab for side B
If a tape without tape type detection holes is used, the deck will be set for normal tapes.
Detection holes
for metal tape Detection holes for chrome tape
3