ASSEMBLY
TO ASSEMBLE GRASS CATCHER (See Figs. 3 and 4)
1.Slide grass catcher bag over the frame. Make sure the rear handle is on top (the same side as the front handle) and the strap is on the bottom.
2.Slip vinyl bindings over frame.
NOTE: If vinyl bindings are too stiff, hold them in warm water for a few minutes. If bag gets wet, let it dry before using.
3. Close grass catcher door.
NOTE: When fully closed, door will “snap” shut over frame and vinyl bindings.
REAR
HANDLE
DOOR
GRASS CATCHER FRAME
VINYL BINDINGS
BAG
FIG. 4
STRAP
TO INSTALL ATTACHMENTS
Your lawn mower was shipped ready to be used as a mulcher. To convert mower to bagging or discharging, see “TO CONVERT MOWER” in the Operation section of this manual.
FRONT
HANDLE
DOOR
FIG. 3
5