Synergy 4500 – Issue 5 – Edition 1 – 18.01.07 – 7993

Base settings

37

 

 

1.Press Menu or Menu until Base Settings is displayed then select the OK option.

2.Press Menu or Menu until Dial Mode is displayed then select the OK option.

3. Press Menu or Menu to highlight the dial mode you want.

4.Select the OK option and you will hear a confirmation tone.

5.Press and hold to exit and return to standby.

Restore default settings

You can restore your BT Synergy 4500 to its default (original) settings. Please note this will delete your phonebook, redial and calls list.

1.Press Menu or Menu until Base Settings is displayed then select the OK option.

2.Press Menu or Menu until Restore Settings is displayed then select the OK option.

3.PIN Code? is displayed. Enter your 4 digit PIN code and select the OK option. The handset power switches off and the base beeps. The handset will then switch itself back on and show the standby display.

If you are registered to more than one base and you try to restore the default settings, you may need to re-select the base you wish to use.

If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com

Page 37
Image 37
BT SYNERGY 4500 manual Base settings