BT SYNERGY 4500 manual Answering machine, Base display

Synergy 4500 – Issue 3 – Edition 1 – 21.08.06 – 7771

40 Answering machine 40

Symbol	Definition
(Blank)	Power off.
C-0(flashing)	Day/Time needs to
	be set.
0-9	Answer-on mode,
	0-9 messages.
9 (flashing)	10-59 messages.
	Indicates when
	more than 9
	messages are
	stored.
– alternating	Power on, but set
with 0-9	to answer off mode.
	The display flashes
	between a dash and
	the number of
	messages saved in
	the memory.
A (flashing)	Handset menu or
	Remote access in
	use.
E (flashing)	Error.
F (flashing)	Memory full.
P (flashing)	Message paused.
P-1:	When selecting
Alternating	or playing Answer
between	& Record outgoing
P & 1	message.
P-2:	When selecting
Alternating	or playing Answer
between	Only outgoing
P & 2	message.

Your BT Synergy 4500 can digitally record up to 11 minutes of messages, with each message lasting a maximum of 3 minutes. As well as recording incoming messages, you can record memos for other users.

You can operate your answering machine from:

•the base.

•the handset.

•remotely, from any other TouchtoneTM telephone, see page 53.

Your BT Synergy 4500 comes with two pre-recorded outgoing messages, Answer and Record or Answer Only, but if you wish you can record your own.

You will need to set the day and time (if you have not already done so) so that you will know when each message was received, see page 9-10.

Base display

The base display shows symbols relative to your answering machine and the table opposite provides an explanation of what these symbols mean.

If you experience any problems, please call the Helpline on 0870 605 8047