BT SYNERGY 4500 manual Call screening, To screen a call via the base, Automatically

Synergy 4500 – Issue 3 – Edition 1 – 21.08.06 – 7771

52 Answering machine

2.You will hear, “Please speak after the tone. To end recording press square”.

3.After the beep, speak your memo clearly into the handset. While recording, the display will show To End Recording Press#.

4.Press to end recording.

5.The display will return to the standby screen. Your memo is now stored and can be played back in the same way as incoming messages.

Make sure the volume on the base is set to an audible level, see

page 42.

You can adjust the call screening volume using the Menu or Menu buttons.

Call screening

When the answering machine is on and takes a call, you can use the loudspeaker to listen to the caller leaving a message. You can then identify the caller and decide whether to take the call in person.

To screen a call via the base

1.Press , or lift the handset off the base, if you want to interrupt and speak to the caller. Recording will stop

automatically.

If you experience any problems, please call the Helpline on 0870 605 8047