BT SYNERGY 4500 manual Answer delay, Base loudspeaker volume

Synergy 4500 – Issue 3 – Edition 1 – 21.08.06 – 7771

42	Answering machine
	If you adjust the volume when the	Base loudspeaker volume
	answering machine is not being
	used, a beep sounds at each press.	You can adjust the base loudspeaker volume from 0
	When the volume reaches its
	highest or lowest levels two beeps	(volume off) to 9, plus H (maximum volume). The default
	will sound.	level is 5.
		1. Press	to increase the volume or	to decrease
		the volume.

For more information on Time Saver setting, see page 54.

Time Saver is displayed on the base unit as t and on the handset as Time Saver.

Answer delay

Answer delay sets the number of times your BT Synergy 4500 will ring before the answer machine picks up your call and starts playing the outgoing message.

You can change this setting to between 2-9 rings or time saver (t). The default setting is 6 rings.

To change the answer delay setting via the base

1.Press and hold until the current setting is announced, then release.

2.Press and release repeatedly to scroll through the settings, until you reach the setting you want. With each press the option will be announced and shown on the base display.

When you hear the setting you want, do not press the button again. After a short delay your chosen

If you experience any problems, please call the Helpline on 0870 605 8047